Snow DK35SE HST front mount snowblower opinions

[drmac]

Some pics during construction. First shows right side of fluid tank and the pump on the PTO. Second, the QC plate with gussets and the mounting bar for the hydraulic motor. Third, the chute rotator motor. Fourth, the rotator switch. And the fifth, finished and ready to go.

Now waiting for the next snow!

 

[grsthegreat]

Great job... bet you cant wait for the snow to hit

 

[image]

Hi all,

Last winter was my first year owning a tractor and the primary reason was to enable my neighbours and me join civilization following very generous dumpings of the white stuff. This was accomplished with minimal difficulty with a 72" Econor attached to the 3 pt.
This winter more neighbours have asked to get on my customer snow removal list. Hard to turn down seat time, but the 3 pt setup on my 69 years made it very demanding on the old neck.
Therefore seeking, from the wide base of knowledge on this forum, opinions on how a front mount snowblower would work on the DK35SE and cost guesstimation.

Thanks, NormB.


DK35HST w/cab, fel, grapple, tiller, scraper blade, box blade, wallenstein chipper, bush cutter, backhoe, pallet forks and of course the econor snowblower.

Hi Norm, I know this is an old thread... But I wanted to let you know that Normand is actually the OEM manufacturer of the Kioti Front Mount Snowblower package. So you can be sure you will get a very high quality unit if you go with the Kioti unit for your tractor. Cheers!