MMM
Platinum Member
No Mike I haven't broken it before but I've only used it this season. I changed first one because it was hammered out, along with any other worn bolts or pins. Preventative maintenence didn't work so well this time.
Does your 3-point take a hydraulic beating
- Thread starter PineRidge
- Start date
- Views: 7797
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
( wonder my my MFG and the others that posted recommend shutting off the drop speed when in transport )
They are worried about safety.. not specifically equipment damage.
Like I said.. do whatever your manuf. reccomends.. but... I however just got done rebuilding the hyds on a tractor that took off an on all weekend due to a blown out gasket from a shock load to the 3pt.
Also.. like the other posters posted above.. the 3pt lockout is not a failsafe device.. and I was only pointing out that it can fail, as it is a valve restrictor.. not some sort of mechanical 'block' that physically prevented the lift from dropping. Also.. if your lift cylinder leaks.. the lockout valve will do little to keep the lift in place.
Soundguy
They are worried about safety.. not specifically equipment damage.
Like I said.. do whatever your manuf. reccomends.. but... I however just got done rebuilding the hyds on a tractor that took off an on all weekend due to a blown out gasket from a shock load to the 3pt.
Also.. like the other posters posted above.. the 3pt lockout is not a failsafe device.. and I was only pointing out that it can fail, as it is a valve restrictor.. not some sort of mechanical 'block' that physically prevented the lift from dropping. Also.. if your lift cylinder leaks.. the lockout valve will do little to keep the lift in place.
Soundguy
