Dieseljeeper
Member
Howdy, I'm going to have to replace my draft control boot. I recently purchased the tractor and found signs of water in the gearbox/hydraulic oil. The only place I could see where it could be getting water is through that boot. The shift and range control boots look new but the draft control boot is almost gone. First, is this a possibility or have I been indulging in controlled substances. Second, from looking at it and the repair manual I looks like I could pull the Allen screws out of the pivot and the yoke and pivot comes off giving me access to the boot. I haven't been into this before so any advise would be really appreciated. Thank, Steve
