Draft & Pressure Shift levers

/ Draft & Pressure Shift levers #1  

Pamm

New member
Joined
Feb 16, 2023
Messages
14
Location
FL
Tractor
Massy

Pressure Shift lever won't move as it is rusted up. The draft lever works well. I put WD 40 on it and a pipe wrench but no luck. Does anyone think it may just be rusted bad and I need to heat it? Or what I can check?
 

Attachments

  • Resized_20230215_152926.jpeg
    Resized_20230215_152926.jpeg
    2.4 MB · Views: 188
  • Resized_20230215_153044.jpeg
    Resized_20230215_153044.jpeg
    1.4 MB · Views: 179
/ Draft & Pressure Shift levers #2  
Welcome to TBN. A little heat couldn’t hurt. Hopefully it’s just rusted and can be loosened up working on it externally.
A new tractor for you I take it?
 
/ Draft & Pressure Shift levers
  • Thread Starter
#3  
Thanks I'll try that this weekend to see if it moves any. Up Down lever has always worked fine, I never used the other one it has always been stuck
 
/ Draft & Pressure Shift levers
  • Thread Starter
#4  
Welcome to TBN. A little heat couldn’t hurt. Hopefully it’s just rusted and can be loosened up working on it externally.
A new tractor for you I take it?
OK That worked after a lot of heat and 30" pipe wrench and a man helping. I was told that that lever has not moved is over 30 years. But now I can't read the writing on the plate to see where I need to run theat leaver. Who has an old emblem like that or a pic so I can see it (175 Massy )
 
/ Draft & Pressure Shift levers #5  
Here is a photo
 

Attachments

  • Screenshot_20230331_091836_Google.jpg
    Screenshot_20230331_091836_Google.jpg
    410.4 KB · Views: 146
/ Draft & Pressure Shift levers
  • Thread Starter
#6  
Thanks I can read part of it. I need a new sticker who ever has those. I really don't know where to leave that lever now. I noticed that in some places it changes the motor sound
 
/ Draft & Pressure Shift levers #7  
If the inner (position or lift control) lever is all the way back (turquoise) color in photo, the pump will run constantly against the relief.

From England:
 
/ Draft & Pressure Shift levers
  • Thread Starter
#8  
OK so when do I do that and is it best to not run constant?
 
/ Draft & Pressure Shift levers
  • Thread Starter
#9  
Thanks that a long way for e-bay, i'll see if any in the states
 
/ Draft & Pressure Shift levers #10  
OK so when do I do that and is it best to not run constant?
Yes, don't do that. Raise to just before that
 
/ Draft & Pressure Shift levers
  • Thread Starter
#11  
ok , i ordered stickers too
 
/ Draft & Pressure Shift levers #12  
Welcome to TBN Pamm,

It sounds like you are tuning up your tractor.

KC
 
/ Draft & Pressure Shift levers
  • Thread Starter
#13  
Trying my best
 
/ Draft & Pressure Shift levers
  • Thread Starter
#14  
If the inner (position or lift control) lever is all the way back (turquoise) color in photo, the pump will run constantly against the relief.

From England:

Ordered it and received the emblems in the mail today
 
/ Draft & Pressure Shift levers #15  
Oh my, that profile pic! Pamm whatcha trying to do, there's a bunch of old dudes with cardiac issues on this forum. :ROFLMAO:
 
/ Draft & Pressure Shift levers #16  
Oh my, that profile pic! Pamm whatcha trying to do, there's a bunch of old dudes with cardiac issues on this forum. :ROFLMAO:
boobies. nuff said.
 
/ Draft & Pressure Shift levers #17  
boobies. nuff said.
When I'm mowing in the heat of summer, I take off my t-shirt...but only in the backyard. I'm too sexy to be doing that while mowing the front, don't wanna be fighting off the womans while I'm busy mowing.
 
/ Draft & Pressure Shift levers #18  
Try pbBlaster for penetrating oil next time ... lots better than WD. Don't forget to lube up those levers to keep it from rusting up again (something better than WD-40). FL humidity & salt air does a number on metal. Can try dry lube if you're worried about dust/sand sticking in there & building up (McLube SailKote lasts a while). Also ... belated welcome to the site. Lots of helpful folks on here. Enjoy the tractor, what are you growing on the farm.
 
Last edited:
/ Draft & Pressure Shift levers #19  
When I'm mowing in the heat of summer, I take off my t-shirt...but only in the backyard. I'm too sexy to be doing that while mowing the front, don't wanna be fighting off the womans while I'm busy mowing.
opposite for me. I don't wanna drive scared phone calls to wildlife management people.
 

Marketplace Items

2013 Chevrolet Silverado 1500 Ext. Cab Pickup Truck (A59230)
2013 Chevrolet...
13042tx (A55973)
13042tx (A55973)
2860 (A56857)
2860 (A56857)
2014 International WorkStar 7300 4x4 Altec A55F 55ft. Material Handling Bucket Truck (A60460)
2014 International...
500 BBL FRAC TANK (A58214)
500 BBL FRAC TANK...
2014 Timpte Hopper Bottom (A61307)
2014 Timpte Hopper...
 
Top