Draw bar hardware

   / Draw bar hardware #1  

missesalot

Bronze Member
Joined
Mar 25, 2017
Messages
99
Location
Brockport NY
Tractor
tc45d
I have a 45hp tractor with a drawbar. I would like to add a d-ring or similar to the drawbar. The hole in the drawbar is 1.25" in diameter. All the hardware I've found has either a 3/4" or 7/8" pin size. What am I missing?
 
   / Draw bar hardware
  • Thread Starter
#3  
dang. I even looked first like a good forum citizen. Funny how when you search on 1.25" something different comes up than if you search 1 1/4". Thank you!
 
   / Draw bar hardware #4  
Welcome, we all been there.... and will be again.
 
   / Draw bar hardware #5  
I have a 45hp tractor with a drawbar. I would like to add a d-ring or similar to the drawbar. The hole in the drawbar is 1.25" in diameter. All the hardware I've found has either a 3/4" or 7/8" pin size. What am I missing?
3/4 or 7/8 will have a little slop but won't hurt a thing, most of us use those size pins on the farm.
 
   / Draw bar hardware #6  
twisted clevis is a nice option too, stands out rather than flops down.

 

Tractor & Equipment Auctions

ALLMAND LIGHT TOWER (A47001)
ALLMAND LIGHT...
AGT Compact Track Loader (A47809)
AGT Compact Track...
2013 420F BACKHOE (A47001)
2013 420F BACKHOE...
2007 GENIE S-60 MANLIFT (A47001)
2007 GENIE S-60...
Cultipacker Parts (A47809)
Cultipacker Parts...
Utility Trailer (A45336)
Utility Trailer...
 
Top