Driving through St. Louis....local input please

   / Driving through St. Louis....local input please #11  
Around here, Bass Pro Shop is the place to hang out and drool so I went to check it out, big let down since I was expecting something like the Cabelas in Sidney, Ne. not even close. I could spend a week in the Sidney store, awesome.
 
   / Driving through St. Louis....local input please #12  
milkman said:
Around here, Bass Pro Shop is the place to hang out and drool so I went to check it out, big let down since I was expecting something like the Cabelas in Sidney, Ne. not even close. I could spend a week in the Sidney store, awesome.

You need to visit BP's original store in Springfield MO. It's the showplace with trout streams and waterfalls running thru the store.
 
   / Driving through St. Louis....local input please #13  
the springfield store is pretty big. The new one just east of KC, Mo (Independence) isn't bad, either.
 
   / Driving through St. Louis....local input please #14  
Ridgewalker said:
You need to visit BP's original store in Springfield MO. It's the showplace with trout streams and waterfalls running thru the store.

I used to run by there every week, right after they got it built, I quit running that way, would love to see it.
 
   / Driving through St. Louis....local input please
  • Thread Starter
#15  
Ok, 370 is deserted...an easy drive. Only problem is I jumped off to gas up at the first exit with gas listed, end of ramp it says 3/4 mile to the gas, ok, I'm off already, ends up being up the hill around the curve through the light app. 1-1/2 miles.

On 70 & 74 everybody was running the limit. First time I have ever taken a drive of that length, cruise consistently set 2-3 over the posted limit (except around markers 98-99 in IL, a well known trap) and been passed by very, very little traffic and virtually no trucks...in 1100 miles. Now I get to do it again in 6 weeks. Thanks to all for the info.
 

Tractor & Equipment Auctions

UNUSED DIGGIT 6' HIGH FENCING - 1 ROLL (A54757)
UNUSED DIGGIT 6'...
UNUSED 20PCS Industrial Polyester Lifting Straps (A53117)
UNUSED 20PCS...
2 windsor 351 inboard motors w/transmissions shafts rutters and props (A55758)
2 windsor 351...
23013 (A55787)
23013 (A55787)
UNUSED FUTURE 32" PIN ON RAKE (A54757)
UNUSED FUTURE 32"...
(APPROX 23) 2" X 3" X 162" TUBING (A54756)
(APPROX 23) 2" X...
 
Top