DX33 . . . It's here . . . really!!!

   / DX33 . . . It's here . . . really!!! #1  

Chuckatuck

Member
Joined
Nov 15, 2006
Messages
38
Location
Chuckatuck Va.
Tractor
CaseIH DX33
DX33 arrived late yesterday afternoon!! (Sorry about the photos being attached . . .still trying to figure out the links).
Picture 039 (Custom).jpg Picture 040 (Custom).jpg

Just enough daylight to do some diggin'!! (Note the rear tire cutting into the lawn-Oops)
Picture 041 (Custom).jpg

and the obligatory tractor rides for the kids!! (Note the smiles!!)
Picture 049 (Custom).jpg
 
   / DX33 . . . It's here . . . really!!! #2  
Chuck,

Congrats on the tractor. I remember my 33 looked that clean at one time. Let us know how you like it. Have fun.

jk
 
   / DX33 . . . It's here . . . really!!! #3  
I have the exact same set up but with turf tires. Wonderful set up – 130 hours so far. Only issue was the bucket leveling indicator bar slightly rubbing on a hydraulic line when the bucket is fully tipped. Is fairly easy to miss during set up and if not caught it can eventually rub through the hydro line and make a real mess. I have seen others post about it so be sure to check it out. I ended up wrapping the hydro line in that area with rubber just to ensure no contact is made when the bucket is fully tipped.
 

Attachments

  • dx_level_gage.jpg
    dx_level_gage.jpg
    112.8 KB · Views: 494
   / DX33 . . . It's here . . . really!!! #4  
That looks a lot like my DX29. Looking at the work you have ahead, I would suggest two things:

1) Either make or buy something like a long toothbar to enable the bucket edge to get under things that are longer than the bucket. I have some teeth made up from channel steel that I bolt to the bucket and which protrude about 6 inches in front of the cutting edge and they are great for picking up logs and such.

2) Seriously consider getting some kind of grapple added to the bucket so you can grab a big hunk of those brush piles when you want to move them. Mine is the Add-a-grapple from precisionmfg.com.

You'll love your machine!
 
   / DX33 . . . It's here . . . really!!!
  • Thread Starter
#5  
Rich,

Thanks for the ideas. That pile has been sitting there for nearly 7 years. When I finally "worked" on it this last weekend, I discovered it has decomposed to the point that it was easier to hand-load the remaining logs buried in the mess as I pushed it around. I know, I should've stayed on the tractor. Better yet, another attachment-- rock bucket!!

Chuck
 
   / DX33 . . . It's here . . . really!!! #6  
Howdy neighbor, nice tractor. I didn't know there was a Case dealer around here.
 
   / DX33 . . . It's here . . . really!!!
  • Thread Starter
#7  
Shaley,

There's one in Wakefield--about 20-25 mins. from Chuckatuck up Route 460. This dealership only had a DX35, 40, 45 and a dx25e on the lot. They also have a dealership in Cheriton on the Eastern Shore. I also believe there is one in Sunbury, NC--about 25 mins. south of Dwtn. Suffolk.

Case IH-Leatherbury Equipment-VA
 
   / DX33 . . . It's here . . . really!!! #8  
Nice tractor. One question, what is that round ring hanging down from center of tractor in the first pic?
 
   / DX33 . . . It's here . . . really!!! #9  
That's a tie down ring, I believe. I don't know if they use them for delivery to the dealer or when they're coming from overseas, but my dealer didn't use it when he delivered my tractor. Some dealers leave them on, others take them off. Mine's still there and has been no problem. I wouldn't mind having a couple more to bolt to other things since they're so sturdy.
 
   / DX33 . . . It's here . . . really!!! #10  
Let me know if you need to borrow a box blade or rear blade or landscape rake. So you can try one before you buy one. All my stuff is 5 ft. I'm just over by Nike Park.
Steve
 
   / DX33 . . . It's here . . . really!!! #11  
Congrats on your new investment Chuckatuck...and many happy ticks on the hour meter to yer.

Sooooo have you decided on a name for that beauty? ;)
 
   / DX33 . . . It's here . . . really!!!
  • Thread Starter
#12  
My folks live by Nike Park at Bay Harbor. Have played many a softball game on those fields. Thanks for the offer on the implements. Fortunately, I had bought some implements (Bushhog, Straight Blade and Box Blade) seven years ago when we first bought & cleared the property! Might have to replace the Howse cutter since it's beat up and seems to have a little wobble in it!
 
   / DX33 . . . It's here . . . really!!!
  • Thread Starter
#13  
Thomas,

My two year old daughter (the one in the pic) has named it "Daddy's Lovie Tractor" So before it even got here, the kids were calling it "Lovie." (No, not Lovie Howell on Gilligan's Island). My wife suggested that I have no choice at this point . . . . I think she's right. Ouch, that hurt to type.
 
   / DX33 . . . It's here . . . really!!! #14  
There's a whole thread here somewhere about people naming their tractors. So far, mine is just "the tractor".
 
   / DX33 . . . It's here . . . really!!! #15  
Ah they look so nice when they are new and clean......but it is a lot of fun to get them dirty!!! Enjoy!!
 

Tractor & Equipment Auctions

case 370 glass door never installed (A61306)
case 370 glass...
2013 PETERBILT 389 (INOPERABLE) (A58214)
2013 PETERBILT 389...
Land Pride RCR1260 (A53317)
Land Pride RCR1260...
2023 KRT ST650 STAND-ON SKID STEER (A60429)
2023 KRT ST650...
2461 (A60432)
2461 (A60432)
UNUSED FUTURE SB45 HYD SILENT BREAKER (A52706)
UNUSED FUTURE SB45...
 
Top