My front end on my e2004 has been poping i noticed some grease leaking from the left pivot on bottom part where it turns. So i took the wheel off and jacked it up there was alot of slack where the top of ball which goes on top of axle end rests and it pivots i undid the lock nut and tightened it down reducing the slack. any idea on proper technique and if that was ok to do?
e2004 front axle pivot kingpins? on top adjustment
- Thread starter shady1701
- Start date
- Views: 1153
Slamfire
Veteran Member
Oncee upon a time I saw some stuff that you injected into the slack that hardened out of the tube. That's the only method I ever saw for something that had no adjustment left. I don't recall the name, and haven't ever looked for any.
normde2001
Elite Member
- Joined
- Mar 10, 2002
- Messages
- 4,163
Back in the old days, automobile front ends had things called "kingpins and bushings". I suspect you need a parts manual and some parts.
