OP
shaeff
Veteran Member
- Joined
- Oct 27, 2015
- Messages
- 1,042
- Location
- Hudson Valley, NY
- Tractor
- MF Utility 35 Gasser, JLG LJ500
I'll definitely check if it's easily accessible or comes apart with ease. Since I'm pulling the cover, I'm going to spray/wipe down the whole interior of the case anywhere that I can reach. It's already pretty clean since I ran diesel through it. I'd rather it stick open than closed!
Good call on the arms/rock shaft, if my books were here I'd have known that! Thanks!
Edit: I just read that the MF (Davis) 99 loader does not have down pressure due to single action cylinders. Why is it, then, that I used my loader to pick the front of my MF Utility off the ground? I did it with the loader arms not the tilt of the bucket. Down pressure is a good thing, something I would use frequently. Any ideas?
Good call on the arms/rock shaft, if my books were here I'd have known that! Thanks!
Edit: I just read that the MF (Davis) 99 loader does not have down pressure due to single action cylinders. Why is it, then, that I used my loader to pick the front of my MF Utility off the ground? I did it with the loader arms not the tilt of the bucket. Down pressure is a good thing, something I would use frequently. Any ideas?
Last edited: