Easy rops brackets

[kennyd]

Something a bit "sexier":

ROPS Clamp™ - BoltOnHooks LLC

ROPS clamps, square tube clamps, rectangular tube clamps, Lightbar mounts, Lightbar brackets

www.boltonhooks.com

 

[scootr]

You posted Sept 27, 2022 and I assume you saw a $25 price. It is now Nov 6, 2022 price is $33.

Price is inflated more than 8% we have been told.

$25-33 is a price increase of 32%. We are told inflation is at an affordable 8% but the cost is rising exponentially

 

[Jimbo16720]

I own a Kubota l245dt and am building my own ROPS next spring. I bought 4 -1/2 x 3 1/4 x 6 ubolts to mount it to rear axle. Going to use 2x2x1/4 angle iron as the top plate on ubolts and weld the square pipe to the angle iron. I'll post a pic when it's done.

 

[scootr]

I own a Kubota l245dt and am building my own ROPS next spring. I bought 4 -1/2 x 3 1/4 x 6 ubolts to mount it to rear axle. Going to use 2x2x1/4 angle iron as the top plate on ubolts and weld the square pipe to the angle iron. I'll post a pic when it's done.

Look forward to seeing what you make.

 

[p0diabl0]

Bad ideas. They would become your rear wheels, when they engage, and they have ZERO tread.

Sure but it would at least be Front Wheel Drive at that point.