Emax20S pallet forks

[Hazel]

I am looking to get a titan Item No. 139110

PALLET FORK ATTACHMENT, With 36" FORK BLADES​

For my 2021 Emax20S HST.

any comments or suggestions would be appreciated
Thanks,
Rick

 

[Joe Hickerson]

Hi Rick. I went with a 42" fork as many pallets are around 4' wide, at least in the business I owned. Also, I move snowmobiles around from time to time. I made up a custom 4x8 reinforced pallet for that purpose. My eMax 25 handles it well. I think your 20s is close to the weight of my 25s.
Joe H.

 

[Hazel]

Good Evening Joe,
Yes I agree the weight of the 25S versus the 20S are close (yours weighting a little more).
After thinking about it, I agree the 42” makes more sense
Thx,
Rick

 

[Joe Hickerson]

Good Evening Joe,
Yes I agree the weight of the 25S versus the 20S are close (yours weighting a little more).
After thinking about it, I agree the 42” makes more sense
Thx,
Rick

I was fortunate my local dealer stocks the Construction Attachments Inc.(CA) brand. Good weight and capacity. Mine is rated 1800lbs, I believe the new version is 2200lbs and still has a reasonable weight....

Joe

 

[Hazel]

Does anyone know the weight of just the loader bucket on the Emax20S HST. I couldn’t find anything on the internet
Thank You,
Rick

 

[rdinatal]

A guess but just shy of 200lbs.

 

[Hazel]

Hi rdinatal
I ask the question thinking that any weight of the pallet fork attachment in excess of the bucket weight would limit my lift capacity.
I checked out the Mahindra site and it lists two different lift capacities 618 and 680 . The fork attachment weighs approximately 250 so I think all is good.

Rick

 

[Hazel]

I ended up purchasing the HLA pallet forks for sub compact tractors.

42” forks with a 900lb 21” load center ssqa

 

[Mahindra-Whispering Maple]

I ended up purchasing the HLA pallet forks for sub compact tractors.

42” forks with a 900lb 21” load center ssqa

Hello. Can you be more specific as to the exact set of forks you purchased? What you have in the photo is what I am looking for. Is there another attachment needed for the quick attach?

 

[Hazel]

My emax20s has the SSQA set up and the Pallet forks attach the same way the bucket does nothing is needed

900 LB Cap. - Light Duty Pallet Fork

1 3/16" x 3 1/8" Class II hook type solid fork lift tines 900 lbs capacity @ 21" L.C. Sliding adjustable Tines can be locked in any position 50" wide carriage

hlaattachments.com