Steve Rose
New member
- Joined
- May 24, 2010
- Messages
- 1
Mowing Blade is not engaging when the right lap bar is pushed forward. Is this controlled by the Normally Closed Safety Switch? Or what should I check first?
Engagement of mowing blades on Cub Cadet Z-44
- Thread starter Steve Rose
- Start date
- Views: 1601
JTKub
Veteran Member
Steve, we need more info. Under what conditions is your PTO working? With the reverse safety switches in stock form, the PTO should only cut off when both lap bars are pulled back. Once one bar is moved forward the PTO should turn back on. Basically if both switches are pressed (opening both), power is cut to the PTO.
Joel
Joel
