Engine Heater

[whatever1]

for a BX-24 which is better a Block Heater or an in line heater ?
If a block heater which side of the block does it go on ?

 

[buickanddeere]

Phillips & Temro - Literature

 

[BigBoyToys]

My B3030 has a threaded plug so it was a simple install.
Take a look here... http://www.tractorbynet.com/forums/kubota-owning-operating/301887-how-remove-replace-block-heater.html

 

[uglyboywith11fingers]

my BX24 has a block heater, I suspect it was dealer installed.
It is on the left side of the engine, just under the intake manifold.
I can't tell if it is in a threaded port, or in a frost plug opening.

Pete

 

[whatever1]

Thank you for the response. I was asking because I had my tractor in for other service and my block heater stopped working. So I asked the dealer to replace it. Turned out mine was an inline heater ( which worked great ) They put in one in the block and it is just OK.

Thanks Again for answering the question.

my BX24 has a block heater, I suspect it was dealer installed.
It is on the left side of the engine, just under the intake manifold.
I can't tell if it is in a threaded port, or in a frost plug opening.

Pete