engine maintenance

   / engine maintenance #1  

B6200

New member
Joined
Jan 31, 2001
Messages
12
Hi, I am a new user. I am the proud owner of a 86 kubota
B-6200. I have owned this tractor since new. When I purchased it in 1986 I almost bought a new pickup truck instead. Well I can say that this tractor has payed for itself and is going on its second time of doing so. My question is this would it be wise to clean my injectors or should they be left alone until hard starting ocurrs.I have 680 hrs on engine and have changed oil and filter every 30 hrs. I use a cetane booster with a anti bacteria additive in the fuel. It starts a little uneven but smooths out quick. say 25 seconds or so. This has probably been the most reliable engine I have ever owned. Any recomendations would be appreceiated.
 
   / engine maintenance #2  
Welcome to the board first of all. /w3tcompact/icons/smile.gif
By the sounds your B6200 well taken care of also shines.

Have you tried some injector cleaner from your local dealer.



Thomas..NH /w3tcompact/icons/wink.gif
 
   / engine maintenance #3  
My Ford 1710 owner's manual calls for removing and servicing the injectors at 600 hours. I asked the dealer about doing the maintenance when the tractor was there for 4wd linkage repair. He said that he doesn't pull injectors until around 2000 hours unless the tractor is smoking and other causes are eliminated. You might want to get a Kubota dealer's opinion.
 

Tractor & Equipment Auctions

2014 Ford Fusion Sedan (A56859)
2014 Ford Fusion...
2019 Ford F-550 (A55973)
2019 Ford F-550...
2006 Utility Trailer MFD. T/A 32FT Dry Van Trailer (A56858)
2006 Utility...
2023 New Holland CR10.90 Combine - 332 Engine Hours - 244 Separator Hours (A55315)
2023 New Holland...
Michelin CARGOXBIB High Floatation Tires (SET OF 4) (A55315)
Michelin CARGOXBIB...
1992 Ford L900 Cab Chassis with Low Milage Cummins (A55315)
1992 Ford L900 Cab...
 
Top