Engine Racing at 540 PTO RPM

JimME · Aug 2, 2001

When I set the throttle so that the engine rpm is around 2,400 for 540 PTO rpm it sounds like it's really racing and isn't enjoyable to listen to. Does everyone run the engine this fast or does it depend on which PTO implement you're using?

Jim in FL

JATO_RaT · Aug 2, 2001

Jim, 2400 RPM is hardly racing. Don't worry about that, 2400 RPM is about right. You will get accustomed to it. All 540 PTO implements should be run somewhere in this PTO speed, while not critical, I generally choose to run mine just under it. Rat...

Bird · Aug 3, 2001

Jim, I don't like the noise, but the machine is built to run like that all day; day after day. Doesn't hurt anything but your ears./w3tcompact/icons/frown.gif

Bird

Gomez · Aug 3, 2001

It doesn't take long to get used to. Nothing like the sweet sound of engaging the PTO,and bringing the implement up to speed.

ChrisR · Aug 3, 2001

Jim, it's perfectly normal, I suggest a good set of ear-muffs.

Chris

Pks · Aug 3, 2001

With my B2400 and 6 foot mower, I run the engine about 2150 RPM. If my mower doesn't need all the power at PTO speed then I'm not going to waste the fuel-IMHO.

BruceW · Aug 3, 2001

Ear muffs with radio is nice for mowing.
bruce

DVerbarg · Aug 3, 2001

I used to run engine rpms around 1800 instead of the 2600 rpm needed for a 540 rpm on the PTO since the mower did not seem to "need" the power. It was recommended that I try it at the higher rpm and found that the mowing job was much cleaner (rotary mower) due to the higher blade speed. Now I always mow at 2600 rpm.

DaveV

cisco · Aug 4, 2001

Most farmers in my area (eastern South Carolina) run at 2000 - 2200 rpm, and don't seem to have any problems (maybe one would if a real fast rpm, and sharp blades, were critical, such as with grass mowing).