Ever see a tractor crack in half?
- Thread starter LittleBill21
- Start date
- Views: 6340
Thomas
Epic Contributor
- Joined
- Apr 6, 2000
- Messages
- 30,940
- Location
- Lebanon,NH.
- Tractor
- Kubota B2650HSD w/Frontloader & CC LTX1046 & Craftman T2200 lawn mower.
Interesting. 
sea2summit
Elite Member
Looks like the repair will cost more than my tractor…
Sawyer Rob
Super Member
Yup, several...
SR
sd455dan
Elite Member
- Joined
- Oct 23, 2012
- Messages
- 4,769
- Location
- North Idaho
- Tractor
- Rhino 554, Ford 550 TLB (JD X500, MTD, Gilson riding mowers) Ford 3000-Sold
Only online.
Even a Green one.
Even a Green one.
Last edited:
John_Mc
Elite Member
- Joined
- Aug 11, 2001
- Messages
- 4,531
- Location
- Monkton, Vermont
- Tractor
- NH TC33D Modified with belly pan, limb risers & FOPS. Honda Pioneer 520 & antique Coot UTV
Been there, done that. Cracked the clutch housing on my NH TC33D. THe only reason it was not in two pieces with its belly on the ground was that the backhoe subframe & belly pan and limb risers/FOPS up above held it together. Dealer estimated $7000 to repair "IF everything came apart and went back together well and IF no further damage was found". Ended up finding a used clutch housing from a New Holland tractor salvage yard and went with a local tractor repair guy. Got it all done for $3000.
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,494
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
Looks like the one where the articulated tractor was hit by a train.
BoylermanCT
Veteran Member
- Joined
- Apr 1, 2013
- Messages
- 1,501
- Location
- Barkhamsted, CT
- Tractor
- Montana R2844, New Holland TC29D, Hustler X-One
We had our New Holland TC29D crack in half at the bell housing. Took us forever to find a replacement part and get it back together. Did it with the help of a friend from church who was a retired John Deere dealer shop manager. Poor design by NH - both the front end loader and backhoe mount at the same spot onto the bell housing and there is no frame to support or reinforce the area. Over time too much stress caused the failure.
ROUSTABOUT
Elite Member
- Joined
- Jan 30, 2008
- Messages
- 3,140
- Location
- Luther Willis Hill, AR
- Tractor
- Pettibone, Ford, Massey Ferguson, International, JD, David Bradley, home mades
I've seen a few break. It's bad situation. It never happens at a good time.
BnRidge
Gold Member
In high school the shop kids restored an old International 400. They pulled it to start it, popped the clutch, and