Farm Pro 2425 grinds when engaging the mower

[greg_g]

Before actually replacing them, I'd suggest taking all 4 to a reputable hydraulics shop and have them rebuilt. Unless there's a bent ram or excess rust, you might get by with little more than a 4 new sets of seals and wipers.

//greg//

 

[Affordable]

Which loader is it ? We have seal kits 25mm and 28mm, also Koyker seal kits

Tommy
Affordable Tractor Sales
"Your Jinma Parts Superstore"
Home of compact Jinma, Foton, and Koyker Tractors and Parts, Wood Chippers, Backhoes - Affordable Tractor Sales Company

 

[Drcom]

Before actually replacing them, I'd suggest taking all 4 to a reputable hydraulics shop and have them rebuilt. Unless there's a bent ram or excess rust, you might get by with little more than a 4 new sets of seals and wipers.

//greg//

I tried that once. It appears there are NO reputable hydraulic shops where I live.

 

[Drcom]

I am not sure. I'll check tomorrow. Thanks.

 

[Drcom]

The tag shows 03962 on a sliver plate. Does that help ?

Which loader is it ? We have seal kits 25mm and 28mm, also Koyker seal kits

Tommy
Affordable Tractor Sales
"Your Jinma Parts Superstore"
Home of compact Jinma, Foton, and Koyker Tractors and Parts, Wood Chippers, Backhoes - Affordable Tractor Sales Company

 

[greg_g]

I tried that once. It appears there are NO reputable hydraulic shops where I live.

I had to buy a pair of curl cylinders for my 3720 (careless neighbor), and got a good deal on refurbished cylinders from Surplus Center. Search for loader cylinders here.

//greg//

 

[David65326]

My farmpro grinds intermittently as I mow. I use a pull behind mower and every so often it sounds like the gears are grinding then it stops. Advice?