Farmall 806 3 Point
- Thread starter leader58
- Start date
- Views: 3708
-
- Tags
- farmall 806
Depmandog
Veteran Member
- Joined
- Nov 26, 2010
- Messages
- 2,038
- Location
- Buckner MO, LaPlata MO
- Tractor
- 2005 Kubota L5030 GST; Farmall 706, 756, 806 & 1086
Are you wanting it so speed up or slow down? Are you familiar with the draft control?
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,952
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
Do you not have a descent control knob under the seat ?
This knob is turned in to decrease the drop speed. and turned all the way in to lock for transport.
This knob is turned in to decrease the drop speed. and turned all the way in to lock for transport.
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,952
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
It may be a T handle, or something similar, but I believe almost every tractor has a control to change the descent speed.
Depmandog
Veteran Member
- Joined
- Nov 26, 2010
- Messages
- 2,038
- Location
- Buckner MO, LaPlata MO
- Tractor
- 2005 Kubota L5030 GST; Farmall 706, 756, 806 & 1086
I inherited an old 706...i don't recall ever seeing a rate descent control knob like is on my Kubota.
I am pretty sure it's all tied into the draft control system. The draft control is the outer lever, next to your 3pt control. Fully forward should be off, then it goes from light load to heavy.
I suspect if operating your draft control isn't making any difference, you will need to rebuild the draft control valve. Perhaps there is an adjustment on the valve itself (not sure).
http://partstore.caseih.com/us/parts-search.html#epc::model_find
You should see a link to IH tractor parts - here you can pull up a parts schematic and see what's what. Since I am on my iPhone, I can't load the pages..but I have used this site in the past to troubleshoot (and order parts). Hope this helps.
NOTE: I edited my parts link..for some reason my local supplier's parts link no longers works...but this one does!
I am pretty sure it's all tied into the draft control system. The draft control is the outer lever, next to your 3pt control. Fully forward should be off, then it goes from light load to heavy.
I suspect if operating your draft control isn't making any difference, you will need to rebuild the draft control valve. Perhaps there is an adjustment on the valve itself (not sure).
http://partstore.caseih.com/us/parts-search.html#epc::model_find
You should see a link to IH tractor parts - here you can pull up a parts schematic and see what's what. Since I am on my iPhone, I can't load the pages..but I have used this site in the past to troubleshoot (and order parts). Hope this helps.
NOTE: I edited my parts link..for some reason my local supplier's parts link no longers works...but this one does!
Last edited:
