Farmall A1
New member
Is the 3*8*J the casting date
Farmall A
- Thread starter husqvarna
- Start date
- Views: 12357
Farmall A1
New member
I think I found that the "J" means 1940. Does that sound right to anone.
DJ54
Elite Member
- Joined
- Jan 20, 2009
- Messages
- 4,616
- Location
- Carroll, Ohio
- Tractor
- IH Farmall 656 gas/ IH 240 Utility/ 2, Super C Farmalls/ 2, Farmall A's/ Farmall BN/McCormick-Deering OS-6/McCormick-Deering O-4/ '36 Farmall F-12/ 480 Case hoe. '65 Ford 2000 3 cyl., 4 spd. w/3 spd Aux. Trans
I posted this sometime back. Check on the engine block as described below. IF it is the original engine, you should find your tractor's serial number.
Originally Posted by DJ54
I stand corrected of a second serial number location... Don't know what I was thinking...
Look on the right front corner of the block, just above the mag, or distributor drive. There is a flat boss just below the head with the serial number stamped there.
You may need to scrape the paint off to see it, if you haven't already found it.
Originally Posted by DJ54
I stand corrected of a second serial number location... Don't know what I was thinking...
Look on the right front corner of the block, just above the mag, or distributor drive. There is a flat boss just below the head with the serial number stamped there.
You may need to scrape the paint off to see it, if you haven't already found it.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
hopefully it is the original block
Farmall A1
New member
I'm almost positive it is because like I said it was my grandfather's and it was his baby. I did find that flat spot on the block but I could see any numbers at all.
Farmall A1
New member
I'm almost positive it is because like I said it was my grandfather's and it was his baby. I did find that flat spot on the block but I couldn't see any numbers at all.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
i was just helping a guy with a C date his and got this link on another forum. maybee it will help here too:
TM Tractor Parts Quality New and Replacement Parts for McCormick Farmall Cub, International Cub, and International Lo-Boy
TM Tractor Parts Quality New and Replacement Parts for McCormick Farmall Cub, International Cub, and International Lo-Boy
Farmall A1
New member
Found the block # FAA 18953
Looks like it is a 1940. Can I get another serial tag using that number?
Looks like it is a 1940. Can I get another serial tag using that number?
farmall 55a case
Platinum Member
- Joined
- Oct 3, 2011
- Messages
- 506
- Tractor
- case ih farmall 55a
Hope you taking before and after pic of this tractor! 
Farmall A1
New member
Will be posting before pictures soon. Where is the best place to get parts for this tractor?
