Farmtrac 535 Filters

   / Farmtrac 535 Filters #1  

BayouKat

New member
Joined
May 9, 2008
Messages
6
Location
Louisiana
Tractor
Farmtrac 535
Can anyone give me the numbers for the oil filter and hydraulic filter on the Farmtrac 535. I need to replace both of them asap. Thanks
 
   / Farmtrac 535 Filters #2  
try wix 51515 oil filter
wix 51712 hydrlic filter
I belive these will work.Take your old one and make sure.
 
   / Farmtrac 535 Filters
  • Thread Starter
#4  
Thanks for your help.
 
   / Farmtrac 535 Filters #5  
the oil filter is just a plain old ford FL1 filter....

the HYd filter depends.. I have found out that two types were installed... one with a 1.5"X12 thread pitch and another with a 40MMX20MM thread pitch... with a 4" to 3.750" gasket seat..

mine was the metric. sucker.... 45.00 hyd filter from wix... Purolator makes a filet for the HYD in the MM pitch but I have not found the number for it yet....
 
   / Farmtrac 535 Filters #6  
Aggravating, to say the least! My dealer, 20 miles from my house,
sent me home with the smaller hydraulic filter. Lucky he was still open when I returned. The second time he sent me home with the larger one, PN ESL15900, and it fit fine. It shows the number 551715 on the outside.

Lesson learned: always take the old filter with you when you go to get a new one!

Good luck!

Tex
 

Tractor & Equipment Auctions

Bad Boy Rebel Zero Turn Mower (A47484)
Bad Boy Rebel Zero...
Rears 1000 gal Orchard Sprayer (A47307)
Rears 1000 gal...
2021 Chevrolet Tahoe Shell (A46684)
2021 Chevrolet...
2012 CIGARETTE RACING TEAM BOAT (A45677)
2012 CIGARETTE...
2011 MAGNUM PRODUCTS LIGHT TOWER/WATER TANK TRAILER (A45046)
2011 MAGNUM...
New Wolverine Auger 12'' & 18'' Bits (A48289)
New Wolverine...
 
Top