Fasse Valves and John Deere 4010 installation

[slaw]

I am purchasing a Fasse Valve with a elect switch today I need help with installation does it need a bracket and what does it look like because im a woman sometimes im sold stuff i really dont need. do i need tips and couplers too I have a John Deere 4010 tractor and it has two ports i want to convert it to 4 so I can use my New Holland 740 baler on it I also have a Alice Chalmers with 4 ports but need 5 because of the pick up is extra so i want to put the extra ports on it too. is there a bracket design my husband can make to use it on other implements. the tips on the baler are standard tips. thanks for any help

 

[J_J]

They look like this. Diverter valve

Select the valve that matches the flow capacity of your tractor.

Fasse Valve - 2010 Consumer

Just find a good spot for the valve and connect hoses in the series flow and use the switch to divert the fluid .

Multiplier valve

Fasse Valve - 2010 Consumer

Plug in this valve for 2 sets of QD's out.

http://www.digitalmagazinetechnology.com/a/?KEY=fassevalve-10-consumer#page=21&zoom=1

http://www.digitalmagazinetechnology.com/a/?KEY=fassevalve-10-consumer#page=21&zoom=1

 

[slaw]

They look like this. Diverter valve

Select the valve that matches the flow capacity of your tractor.

Fasse Valve - 2010 Consumer

Just find a good spot for the valve and connect hoses in the series flow and use the switch to divert the fluid .

Multiplier valve

Fasse Valve - 2010 Consumer

Plug in this valve for 2 sets of QD's out.

Fasse Valve - 2010 Consumer

Fasse Valve - 2010 Consumer

Thanks for the information I bought the one that mounts to the tractor i need a bracket I guess.

 

[jim_wilson]

Might be worth reading thru Artisan's "Grappleomatic" thread - he installed a Fasse valve and has a pretty good explanation of how he mounted it and how it works for the uninitiated.

http://www.tractorbynet.com/forums/build-yourself/229869-bx25-grappleomatic.html