I inherited several IH implements with the fast hitch attachment. I was told by a JD dealer that there are adaptors that would allow me to use these (three bottom plow, 8 foot disk, 5 foot blade) on a 3-point system. Does anyone know anything about these such as where to buy one, cost, how well they would work etc.? Thanks. John
fast hitch adaptor
- Thread starter JohnAE
- Start date
- Views: 1421
BobG_in_VA
Veteran Member
- Joined
- Jul 4, 2003
- Messages
- 2,027
- Location
- Central VA, USA
- Tractor
- Mahindra 6000 MWFD, 2 1950's Farmalls, 1974 Farmall 140, 1967 Mf 135Delux
Before you buy any adapter, find out what size prongs the 2 pt implements have. I'm pretty sure your 3 bottom plow will have the large points (3 inches from top to bottom at the prong), but the 5 ft blade may be a small prong (2 1/2 inches at the prong). The small pronged implements were used on the Super C, 200, 230 and possibly the 240. The large prongs were used on the 300, 350, 400, etc. What IH tractors did your family have? Once you determine the implement usage you can look for the adapter. NOTE: You can weld a 1/2 inch piece of steel plate to the bottom of the small prongs to make them fit the larger 2pt system, but you can't do the reverse..) BobG in VA
ronjhall
Super Star Member
Here is what one TBNer did. Click Here Maybe it is an adapter.
BobG_in_VA
Veteran Member
- Joined
- Jul 4, 2003
- Messages
- 2,027
- Location
- Central VA, USA
- Tractor
- Mahindra 6000 MWFD, 2 1950's Farmalls, 1974 Farmall 140, 1967 Mf 135Delux
I have seen exactly one of those adapters that will hook up to a 3 pt and then take the 2 pt implements into it. You may want to try Worksaver or Steel Wheel Ranch. Worksaver has the conversions from 2 to 3pt and may have the the one you are looking for. Bobg in VA
sweettractors
Advertiser
I think we can supply that setup. Call Toll Free 1-866-528-3323 with any questions. Ask for Operations Manager, Kenny Melvin--Ken Sweet
