favorite USA made work boot?

[displacedPA]

Im sure I will get answer across the board on this one. I like wearing usa made boots and ones that are resoleable.
I have worn timberlands, rockys, wolverines, Keens, Red wings all of which have not held up to my job. The soles come off the leather tears in the toe area. Im currently wearing a pair of Chippiwas 8'' steel toe boots. They are nice boots and the leather is very high quality full grain from what I can tell.


Does anyone one here have any experiance with Whites boots or Wessco boots? From my reasearch they are the toughest boot money can but and are completle rebuildable.

They are not cheap but if they hold to their claim of being comfortable and durable I would give them a try.

 

[TheGoose]

The only boot I ever really liked was the "Georgia" brand. I cannot find them around here anymore. Right now I am wearing "Ariens (sp?)" and they are OK but are not very comfortable. These are slip-on boots, not lace up.

 

[Larry Caldwell]

Loggers in the Pacific Northwest favor Danners

Danner - Boots

 

[MIKE R]

Its Justin boots for me.

 

[1scooter]

I have a pair of White's Outdoorsman's (lace to toe) 3 year's old now, and still in great condition. They are 10" boots and are very heavy. I do not wear them every day, because of the weight, they are made super tough. I myself don't like tall heal's that's why I got the Outdoorsman. I also have a pair of Carolina #309 that are made in the USA and I like them very well. They are a 6" boot and are holding up very well after about 4 month's. You will not go wrong with the White's but it take's a while to get them. Good luck!!
Regards, JOHN

 

[two_bit_score]

Deleted

 

[two_bit_score]

Product Detail


1155 Men's 11-inch Pull-On Boot

LEATHER:
Brown Boomer Leather*CONSTRUCTION:
Goodyear Leather Welt*INSOLE:
PORON®*LAST:
72*OUTSOLE:
Vibram® Chemigum Cork*COUNTRY OF ORIGIN:
Made in USA*CARE PRODUCTS:
Boot Oil,Leather Protector*
SHANK:
Steel*
NON-MARKING:
Yes*
DEFINED HEEL:
Yes-90 Degrees*
MSRP:
224.99*
SIZES: B 9-12,13,14,C 9-12,13,D 6-12,13,14,15,16,E 7-12,13,EE7-12,13,EEE7-12,13,14

Can't say they are as indestructible as you seem to want but they are very good 'made in the USA' boots.

 

[murphy1244]

Product Detail


1155 Men's 11-inch Pull-On Boot

LEATHER:
Brown Boomer Leather*CONSTRUCTION:
Goodyear Leather Welt*INSOLE:
PORON®*LAST:
72*OUTSOLE:
Vibram® Chemigum Cork*COUNTRY OF ORIGIN:
Made in USA*CARE PRODUCTS:
Boot Oil,Leather Protector*
SHANK:
Steel*
NON-MARKING:
Yes*
DEFINED HEEL:
Yes-90 Degrees*
MSRP:
224.99*
SIZES: B 9-12,13,14,C 9-12,13,D 6-12,13,14,15,16,E 7-12,13,EE7-12,13,EEE7-12,13,14

Can't say they are as indestructible as you seem to want but they are very good 'made in the USA' boots.

That's the boot I'm buying, How much?

 

[etcallhome]

If that's the boot you're buying here is the place to buy them ,Charm Harness and Boot in Charm ,Ohio. I've bought several pairs of shoes for myself and family , always the cheapest price around, treated fairly never any questions if we had a problem with shoes for the grandkids , wife or myself.
Though I had there phone # could not locate it , but I know they have a phone , they are in Amish country. Sells just about any brand , I know Red Wing because that is what I'm wearing for my work shoes.

 

[oldballs]

My Danner and Chippewa boots (both made in USA) are too expensive and too nice to wear in the dirt and grease. So I just wear them for dress up and on Sunday's. For dirty work I wear Georgia and Rocky (good boots...not USA made) in several configurations. Danner says they will rebuild their boots if requested.