FEL hydraulics making noise

   / FEL hydraulics making noise #1  

CDsdad

Platinum Member
Joined
Jun 19, 2005
Messages
643
Location
Wayne County, MS
Tractor
Massey Ferguson 1533
If I curl my bucket and lower it at the same time on my 1533 I hear a slight hiss and then a popping/crackling sound. Nothing bent or broken, and I can't find a leak. It's all still new, less than 5 hrs, so might I have a loose fitting or a small leak. Hydraulic oil where it was when delivered. Sounds like it's coming from right side of FEL. This is my first FEL, so I don't really know what should sound right.
 
   / FEL hydraulics making noise #2  
CDsdad said:
If I curl my bucket and lower it at the same time on my 1533 I hear a slight hiss and then a popping/crackling sound. Nothing bent or broken, and I can't find a leak. It's all still new, less than 5 hrs, so might I have a loose fitting or a small leak. Hydraulic oil where it was when delivered. Sounds like it's coming from right side of FEL. This is my first FEL, so I don't really know what should sound right.
The slight hiss isn't anything to worry about. It is air coming out of the small filter under the seat. When the rams retract fluid flows into the sump. That displaces air which goes out the vent filter.
I would try to find out what the popping is. It shouldn't be doing that.
 
   / FEL hydraulics making noise
  • Thread Starter
#3  
Thanks, Jerry. I just noticed the popping. It's not loud and it is definitely a different sound than the hissing. I'll get it checked out.
 

Tractor & Equipment Auctions

TORO MBTX 2500 STAND-ON CONCRETE BUGGY (A51406)
TORO MBTX 2500...
Chevrolet C8500 Flat Bed with a Moffet Kit (A55218)
Chevrolet C8500...
2017 Nissan Versa SV Sedan (A53424)
2017 Nissan Versa...
(APPROX. 15) UNUSED IRANCH GROUND PROTECTION MATS (A54757)
(APPROX. 15)...
UNUSED DIGGIT 6'5"-10 DRAWER, 2 CABINET WORK BENCH (A54757)
UNUSED DIGGIT...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
 
Top