Flail Mower Ferri Model number

[NeilP]

I wonder if anyone has an idea of the model number of this Ferri Flail... only problem is, due forum restrictions I can稚 yet post pictures of it for you until I have posted 3 times.

So i値l explain first... then reply to ( hopefully) some replies then I can post a link to my Post Images gallery

Going to need new blades soon, and possibly the collars / tubes they run on.

I have just replaced pulley with a glancing blow while trying to drive it off the taper ... in order to replace the rotor bearing...


When you see the pictures keep the following in mind.
Late 80痴 ｴ early 90ｴs flail
Non- original three point linkage frame
Home made rear roller.

Working width 2 meter thereabouts
Overall width I think 2.20 or a little more

Non side shift model



So, photos coming... once I get past my 3 posts count

 

[NeilP]

No idea what is going on in that last post with the weird punctuation

I have gone back and edited it , and still the weird punctuation appears

 

[NeilP]

Maybe I can post the images now

Look, this was the bearing I replaced !
Why did I replace it! Must still be another few hours wear left in that casing !

 

[NeilP]

Ok
Here is the complete flail mounted on the mid 60痴 curved wing MF 135...




Trying to find part number / dimensions for the blades and the support tube

I think Sparex S.78346




See... loads of life left in the old bearing. Another days work left in that ...

 

[leonz]

Hello Neil,

I want to welcome you as the newest resident member of the " Flail Mower Nations"
Please fill in your information as we may have a flail mower nations resident member
nearby that can help you with any problems you may have in the future.

As for manuals and parts:

You can contact Ford Distributing in Columbus, Ohio to find a manual and parts list for your FERRI Flail Mower.
1-888-222-8455

Their mail address is as follows;

Ford Distributing
4061 Perimeter Drive
Columbus, Ohio 43228

 

[NeilP]

Ok, yes, I saw some profile information earlier, but I was busy in workshop

Trouble is, I have no idea of model number to look for manual
Nicola, at Ferri in Italy gave me pulley and taper part numbers but she was unable to identify the model, which is why I am trying here.

I will sort my profile

 

[NeilP]

Maybe I will do the profile when I can get to a computer
This site is impossible to navigate on an iPhone screen, with pop up adverts covering half the *+^^ screen

Some times you end up typing, but the cursor is hidden, so you have no idea what you are typing
Found my place for the profile, but no 粗dit button

 

[NeilP]

Please fill in your information as we may have a flail mower nations resident member

You can contact Ford Distributing in Columbus, Ohio to find a manual and parts list for your FERRI Flail Mower.
1-888-222-8455

Profile done.

Think I'll need a model number first...to get a manual. hence the reason for the sport..hoping some one recognises it.

Live on a small island ..Jersey 9 x 12, even the old dealer here no longer remembers what it is ..they were taken over by a bigger local dealer.

 

[leonz]

Hello Neil, Send Ferri a picture of it I am sure they could identify your flail mower.

 

[NeilP]

Hello Neil, Send Ferri a picture of it I am sure they could identify your flail mower.

Unfortunately not,
As I mentioned in post number 6 I think, I have already been in contact with Ferri, Italy and Nick from there could not help.

This is why I was trying here.

Will have to get a blade set off this winter and measure up.