Capt. Bob
Bronze Member
Some time ago I found a filter cross reference table on this forum but I can't find it any more. Yes, I have done several searches and no joy. Anybody have a link or know where it is? CK30 in particular. Thanks
Oil & Fuel Filter cross reference
- Thread starter Capt. Bob
- Start date
- Views: 18873
fried1765
Super Star Member
- Joined
- Jan 6, 2015
- Messages
- 10,086
- Tractor
- Kubota L48 TLB, Ford 1920 FEL, 8N Ford, Gravely 12 HP "Professional", 48" SCAG Liberty
If it is old machinery I use cross referenced filters.
If it is new, in warranty, or relatively new machinery, I use only OEM.
Amvcane
Platinum Member
- Joined
- May 24, 2013
- Messages
- 656
- Location
- NEPA
- Tractor
- 2012 Kioti CK35hst tlb; 1988 JD 420; 1990 JD 322; 1987 JD 332; 1985 JD 318; 2010 JD ProGator 2030A;
I have twice bought filters on e-bay from Greene's Tractor Parts in TN. No affiliation, just a satisfied customer. They have different packages containing original Kioti and quality aftermarket companies at reasonable prices and free shipping.
First aftermarket engine oil filter I bought at nappa fit, but was 3/4" taller and I had trouble getting the side engine panel back on.
Hope this helps.
First aftermarket engine oil filter I bought at nappa fit, but was 3/4" taller and I had trouble getting the side engine panel back on.
Hope this helps.
I have been using the Wix51324 engine oil filter ever since my warranty ran out. I like them because the anti drain back valve actually works unlike the OEM's. I don't have any problems with them fitting even though they are longer. I am mainly looking for the numbers for the hyd. and fuel filter in a Wix.
YLee Kioti
Platinum Member
This is what I used to buy my filters.
WIX Filters - Products Catalog Home
bought both hydraulic filters and saved over 50 bucks...
next time will buy the Wix oil filter as well...the only filter that did not X-reference was the fuel filter.....that one is still 70 bucks........but the parts guy told me unless I'm having performance issues going over 200 hours is no big deal.......
WIX Filters - Products Catalog Home
bought both hydraulic filters and saved over 50 bucks...
next time will buy the Wix oil filter as well...the only filter that did not X-reference was the fuel filter.....that one is still 70 bucks........but the parts guy told me unless I'm having performance issues going over 200 hours is no big deal.......
YLee Kioti
Platinum Member
The CK series filters no doubt different then the NX series????
Sorry that didn't work.
If you're interested, post your hyd. OEM numbers and let me try.....don't mind seeing if I can find a work around....
