Finally got it right

   / Finally got it right #1  

ns_in_tex

Platinum Member
Joined
Mar 24, 2002
Messages
914
Location
East Texas
Tractor
Kubota L4610 HSTC, International 2400, Hesston 1280,
At least very close to right.

A few years ago, we mounted a 30" lawn mower deck on our FEL & powered it with a hydraulic motor.
It kept progressing through building a heavier deck. Heavier blade. Swinging blade ends. ETC.

Recently we changed the mount. Installed a heavier spindle and adapted it to use either the swinging blade (think bush hog) or a 29" saw blade we had in the junk pile.
It is mounted in a trailer hitch mount so it can be rotated full circle, by hand in 90 degree increments. It also will rotate a little over 90 deg with hydraulics from the cab. It is about 11' long (in front of the FEL) so it has about a 15' working height.

I think we just about have it so we can get some production out of it.
It will cut off a 4" limb so fast it doesn't have time to bind on the saw blade, when cutting from the side, while running the tractor at 1400 RPM.

Well, we got our pictures attached, out of order. If you will look at 2, then 3, then 4, then 1, it might make sense.

Picture 1 is the same tree as picture 4, about 8 minutes later.
 

Attachments

  • 0827141353.jpg
    0827141353.jpg
    295.8 KB · Views: 264
  • 0827141326.jpg
    0827141326.jpg
    353.8 KB · Views: 329
  • 0827141327.jpg
    0827141327.jpg
    276.6 KB · Views: 316
  • 0827141345.jpg
    0827141345.jpg
    373.9 KB · Views: 269
   / Finally got it right #2  
Very nice ..
 

Tractor & Equipment Auctions

2017 Peterbilt 348 T/A Rolloff Truck (A51692)
2017 Peterbilt 348...
2012 UNVERFERTH 6-INCH FRONT WHEEL SPACER KIT FOR 10 BOLT HUB (A52748)
2012 UNVERFERTH...
NEW HOLLAND 706 30 INCH 3PT DIRT SCOOP (A52748)
NEW HOLLAND 706 30...
2013 FREIGHTLINER M2 TANDEM AXLE DAY CAB (A52576)
2013 FREIGHTLINER...
2000 HEIL TRAILER INTERNATIONAL FUEL TRANSPORT TRAILER (A52472)
2000 HEIL TRAILER...
Club Car Electric Golf Cart (A51694)
Club Car Electric...
 
Top