BeeBop
Silver Member
- Joined
- Jan 4, 2002
- Messages
- 166
- Location
- Louisburg NC
- Tractor
- 02 Kubota L-4610 HST w/4in1 bucket & R-4s
You'll love this set up, I have one as well that came w/my Jiffy Hitch and I adore it. Good luck w/it.
Finally Got My Hyd. Top Link
- Thread starter Spencer
- Start date
- Views: 1776
DDT
Platinum Member
- Joined
- Dec 18, 2000
- Messages
- 953
- Location
- Clay Center, Kansas
- Tractor
- Kubota M6040/cab, BX25D, RTVX900
They do make a 90 degree fitting with a swivel, I had to put one on mine for the same reason.
GlueGuy
Veteran Member
- Joined
- Jan 24, 2001
- Messages
- 1,654
- Tractor
- Kubota B7500
Spence,
Looks great! You will (soon) appreciate the amount of time that the hydraulic top-link saves; especially if you're using a boxblade. I have found that I (usually) leave the 3PH in float, and modulate the top-link to control the amount of cutting or laying that I'm doing with the boxblade.
I see your dilema with that one hose. Doesn't look exactly right either up or down, although I like it better in the down position. Might consider just going straight out (no elbow), and attach a swivel? Just a thought. /w3tcompact/icons/crazy.gif
Looks great! You will (soon) appreciate the amount of time that the hydraulic top-link saves; especially if you're using a boxblade. I have found that I (usually) leave the 3PH in float, and modulate the top-link to control the amount of cutting or laying that I'm doing with the boxblade.
I see your dilema with that one hose. Doesn't look exactly right either up or down, although I like it better in the down position. Might consider just going straight out (no elbow), and attach a swivel? Just a thought. /w3tcompact/icons/crazy.gif
2thdoc
Bronze Member
Spence, I might have missed it in a previous post, but what is the model # of your cylinder?
OP
Spencer
Veteran Member
- Joined
- Jan 2, 2002
- Messages
- 1,267
- Location
- Western Michigan
- Tractor
- NH TC33D w/R4 Tires, Rear Remote, Hydraulic Toplink, 2 Auxiliary Work Lights, 7308 Loader w/Kasco Uni-Hitch (Quick Tach)
Here is a link to the previous post.
<A target="_blank" HREF=http://www.tractorbynet.com/cgi-bin/compact/showthreaded.pl?Cat=&Board=implement&Number=122375&page=2&view=collapsed&sb=5&o=&vc=1#Post122375>http://www.tractorbynet.com/cgi-bin/compact/showthreaded.pl?Cat=&Board=implement&Number=122375&page=2&view=collapsed&sb=5&o=&vc=1#Post122375</A>
Spence
<A target="_blank" HREF=http://www.tractorbynet.com/cgi-bin/compact/showthreaded.pl?Cat=&Board=implement&Number=122375&page=2&view=collapsed&sb=5&o=&vc=1#Post122375>http://www.tractorbynet.com/cgi-bin/compact/showthreaded.pl?Cat=&Board=implement&Number=122375&page=2&view=collapsed&sb=5&o=&vc=1#Post122375</A>
Spence
