Finally.... LS scan tool!

[ZetorSteve]

They don't have one for my tractor.

Does yours have a standard 16 pin OBD2 connector under the column shrouds? My MT240 does and a cheap code reader for a car works great for reading/clearing codes. Has a lot of pids in the live data menu too.

 

[charles todd]

I am sure many will appreciate a scanner specific to to our tractors! Here is a link:

LS Tractor Diagnostic Scanner Fault Code Reader

Service and Maintain Your LS Tractor. The LS Tractor diagnostic scanner enables you to read the fault codes that relate to the check engine light for your LS Tractor as well as display critical live engine data. It works on all LS Tractor models listed in the drop down box above. With the code...

www.lawntractorco.com

I haven't looked into what the scanner will do yet. Apparently it comes with the adapter from the 6 pin to the 9 pin.

There is a 'pull down' menu to select models.

In the "pull down" menu, it list P7010.

P7010 is a mechanical injection, EGR engine. No ECU. No DEF. No Regen. I am aware of no electronic control modules on a P7010. What would this device do for a P7010 owner? Unless I do not know the in's and out's of my tractor and missed something.

CT

 

[LS Tractor Owner]

Don't know why it's listed..... I don't have any use for it either....

Just found this and posted forward for those needing....

 

[dragonsbane1964]

I bought one of the scanners for my xr4040. After the salesman helped with the adaptor i needed it worked fine. Told me that the dpf filter was clogged up so tractor was in 30 sec run mode.