Tractor Sizing Finally pulled the trigger

   / Finally pulled the trigger #11  
Looks good! :thumbsup:

I think I would look at tidying up those hydraulic lines that are hanging down. Something doesn't seem right there.

That is the way they hang. There is a hanger, but it does not help much. On the one I owned, I drilled a couple holes in the floor board & used a bungee cord to hold the lines up.
 
   / Finally pulled the trigger #12  
Great looking tractor, congrats!! :cool2:

If you have over one acre to mow,, my crystal ball says I see a rear discharge rear finish mower in your future,,, :thumbsup:
 
   / Finally pulled the trigger #13  
That is the way they hang. There is a hanger, but it does not help much. On the one I owned, I drilled a couple holes in the floor board & used a bungee cord to hold the lines up.

That's not the way mine hang. The hangers keep them up nicely. In fact, I have to push them down in order to have enough slack to remove the loader. Your hoses must be routed differently than mine.
Here's an odd thing, with all the pics I have of my 2720, I don't have one of the right side with the loader on.
 

Tractor & Equipment Auctions

2019 Dodge Journey Crossroad SUV (A50324)
2019 Dodge Journey...
2015 JLG Triple-L Flatbed T/A Trailer (A50324)
2015 JLG Triple-L...
2020 KUBOTA RTV X1100C UTV (A51406)
2020 KUBOTA RTV...
2005 Hino 268 Truck, VIN # JHBNE8JTX51S10984 (A51572)
2005 Hino 268...
Forerunner 10-16.5 N.H.S Tires and Rims (A50322)
Forerunner 10-16.5...
Grundfos Centrifugal Pump (A50121)
Grundfos...
 
Top