Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
</font><font color="blue" class="small">( suspect that is the problem. The mower hitch has a wallowed out hole too and the pin doesn't fit snuggly. )</font>
In the past, I've cut a section of steel pipe and welded it in holes that were badly wallowed out. made it like a sleave or bushing.. works great if you can find a pipe with an ID near the OD of the pin you want to use.
Soundguy
In the past, I've cut a section of steel pipe and welded it in holes that were badly wallowed out. made it like a sleave or bushing.. works great if you can find a pipe with an ID near the OD of the pin you want to use.
Soundguy
