First Maintenance Job ?

   / First Maintenance Job ?
  • Thread Starter
#11  
Really appreciate all the feedback guys. I am heading to my local dealer to get some filters so I can refresh the fluids. We had 116 degrees Fahrenheit here a couple of days ago in Sydney so certainly a good clean out around the radiator is also on the cards.

And I will start to document the maintenance history.
 
   / First Maintenance Job ? #12  
I keep a record of my service history on the blank pages at the end of the owner's manual. I also used to write the change date on the filters with a Sharpie but it fades so much I gave up on that.

Another thing I would recommend is spending the money on getting an owner's manual if you don't have one as well as the factory service manual. Also, with the service manual buy the parts list. The parts list has better illustrations as well as the parts numbers....at least for my Kubota. This can be pricey but it is well worth it. I think I got my service manual and parts list from Messicks. Around $110 if I remember correctly.
 
   / First Maintenance Job ? #13  
Welcome to TBN Ben.
As others already said,if you have doubts etc. something doesn't seem right repair or replace soon as you can which will save you headache also lots of $$$'s.
 

Tractor & Equipment Auctions

New/Unused 10ft X 20ft Single Garage Metal Shed (A57454)
New/Unused 10ft X...
2018 Nissan Titan 4x4 Crew Cab Pickup Truck (A56858)
2018 Nissan Titan...
2006 APPA TL (A55787)
2006 APPA TL (A55787)
KJ 20' Metal Farm Driveway Gate (A53314)
KJ 20' Metal Farm...
FORD 3PT. REVERSABLE SCOOP PAN (A52708)
FORD 3PT...
LOT: Shop Tools: (2) Sets of Truck Ramps, Pittsburg Creeper, Step Stool, Road Cones, Rolling Stool (A59076)
LOT: Shop Tools...
 
Top