shanerbock
New member
on a 2008 mahindra 4530 what oil and filter is best and whats the best way to do it
first oil chane
- Thread starter shanerbock
- Start date
- Views: 696
mddorange
Elite Member
- Joined
- Jul 16, 2014
- Messages
- 3,357
- Location
- Guin, AL
- Tractor
- 2014 Kubota L3200 DT w/LA524 FEL, Loaded rear tires, LP RCR 1860 5' Cutter, LP RTA 1258 5' Tiller, LP PFL 2042 Pallet Forks w/60" Extensions, KK BB60 Box Blade, KK PHD-12" Post Hole Digger
:welcome:
To TBN Shanerbock. Did you just get the tractor? How many hours on it?
To TBN Shanerbock. Did you just get the tractor? How many hours on it?
PHPaul
Platinum Member
- Joined
- Feb 15, 2011
- Messages
- 760
- Location
- Downeast Maine
- Tractor
- Kubota B2650 with cab, Pasquali 986
First off, an owner's manual will give you a lot of useful information and the API (American Petroleum Institute) ratings they recommend for your tractor's oil. CH-4 through CJ-4 are the current standards last I knew.
As to brand, any oil that meets those API ratings and is of the proper viscosity is fine. Personally, I use Shell Rotella 15w40. The ratings are marked on the bottle.
Oil filter brands are like Ford vs. Chevy, you'll get arguments from both sides. I've used NAPA/Wix on everything I've owned since I bought my first car in 1968. NAPA should have a cross reference that will tell you which number is right for your tractor.
As to brand, any oil that meets those API ratings and is of the proper viscosity is fine. Personally, I use Shell Rotella 15w40. The ratings are marked on the bottle.
Oil filter brands are like Ford vs. Chevy, you'll get arguments from both sides. I've used NAPA/Wix on everything I've owned since I bought my first car in 1968. NAPA should have a cross reference that will tell you which number is right for your tractor.
