FIRST ROTOTILLER PURCHASE

   / FIRST ROTOTILLER PURCHASE #1  

inveresk

Platinum Member
Joined
Aug 16, 2005
Messages
720
Location
Saltspring Island, BC, Canada
Tractor
Case CX31B ZTS
I'm looking to make a first tiller purchase. I only have a small area to till, around 4 acres, and it won't be done very often, so I don't want to spend more than I have to. This is my first attempt at preparing an existing meadow/orchard and resowing it so I'm starting at a fairly low level of knowledge and virtually no experience. I've looked at a broad range of tillers from the Jinma to the Farm King with a wide range in price. I've done as much homework as I can online but there are a number things I need advise on,

1 How important is tilling depth? The Jinma can till to a depth of less then 5" max but is really cheap whereas the Farm King has a 17" rotor diameter so should be able to dig at least a couple inches deeper. However, the Farm King is 3 - 4X more expensive. Is tilling depth important? If so, why?

2 Can anyone give feedback on the Jinma build quality and robustness?

3 Are reverse tine tillers more expensive and are they worth it?

4 Is it normal/better to disc an existing meadow first before rototilling or can I get away with just the one implement? I don't mind making several passes if that's what it takes.

5 Anything else I should be aware of that might make a difference to the choice of implement or how I use it?
 
   / FIRST ROTOTILLER PURCHASE #2  
Cannot answer all your questions.
<font color="blue"> 1 How important is tilling depth? </font>
I only till about 4 to 6". My tiller will go 8". I find that soil type will determine how deep to till. Sand will only need 3 to 4". Clay need to be tilled deeper.
<font color="blue"> 3 Are reverse tine tillers more expensive and are they worth it? </font>
My reverse tine tiller can till most soil in one pass. But it requires more power to run it. Here is a link to a thread on a reverse tine tiller. Click Here
<font color="blue"> 4 Is it normal/better to disk an existing meadow first before rototilling or can I get away with just the one implement? </font>
If area that need to be tilled has tall weeds. I cut them down with a rotary cutter. If you do not the weeds will tangle around the tines. Using a disk will also help to chop up the weeds.
 
 

Tractor & Equipment Auctions

MacDon C3012F Corn Head (A53342)
MacDon C3012F Corn...
UNUSED JCT 84" HYD DOZER BLADE (A51248)
UNUSED JCT 84" HYD...
2001 Blue Bird Commercial Portable Office Bus (A51692)
2001 Blue Bird...
2013 COACHMEN CATALINA TRAVEL TRAILER (A52472)
2013 COACHMEN...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2014 Bandit 4000T Foresty Mulcher (A52384)
2014 Bandit 4000T...
 
Top