AndyMA
Elite Member
- Joined
- Oct 11, 2000
- Messages
- 3,713
- Location
- Windham County, Conn
- Tractor
- Ford 2120 , Kubota MX5200 , Deere X748SE. 1956 Economy Tractor
Mowing flail mower vs. bush hog
- Thread starter moonstruck
- Start date
- Views: 4452
OP
moonstruck
Bronze Member
I do have one more question. Will a flail mower mow a pasture that is slightly overgrown? If I let it grow to 6-7" can I cut it back to 3" without overloading?
AndyMA
Elite Member
- Joined
- Oct 11, 2000
- Messages
- 3,713
- Location
- Windham County, Conn
- Tractor
- Ford 2120 , Kubota MX5200 , Deere X748SE. 1956 Economy Tractor
</font><font color="blue" class="small">( Thanks for the info Bird,Golfgar4
Chris )</font>
Yes easily if you have enough pto hp and the right blades in the flail mower. For only 6-7" the standard blades should be fine and I don't think the ho increase would be much depending on how wide you went. Many golf courses use flail mowers for some of their mowing.
Andy
Chris )</font>
Yes easily if you have enough pto hp and the right blades in the flail mower. For only 6-7" the standard blades should be fine and I don't think the ho increase would be much depending on how wide you went. Many golf courses use flail mowers for some of their mowing.
Andy
OP
moonstruck
Bronze Member
Andy,
Thanks, sounds like it will do everything I need.
Thanks, sounds like it will do everything I need.
jimg
Veteran Member
- Joined
- Jun 5, 2003
- Messages
- 2,039
Interesting thread! When I was purchasing a tractor I too was interested in a flail mower. However, I couldnt find anyone who would recommend them. The reasons were high initial cost, high cost of up keep, not as good a cut as a conventional mower. What I could never get an answer for was what are the high up keep costs. No one I talked to could answer that one. So, what are they?
It seems that flail mowers would be more flexible than rotary types b/c w/ a changes of blades (or hammers...is that what theyre called?) you could have a mower suited for a wide range of situations.
It seems that flail mowers would be more flexible than rotary types b/c w/ a changes of blades (or hammers...is that what theyre called?) you could have a mower suited for a wide range of situations.
djradz
Veteran Member
I think you'll regret purchasing such a small-width machine. You will be at it a long time if you're mowing 6 acres with a ~5 ft deck. A TC 35 should be able to handle 7 ft. I'd opt for a 6 foot deck as a minimum.
OP
moonstruck
Bronze Member
I keep changing my mind on the width I need for two reasons. 1) I have a number of trees that I need to mow around/between on part of the property. 2) The ground is uneven in many places.
I do have a large fence line and like the offset feature of a flail mower that would allow me to get up close to a fence.
Does anyone have a "rule of thumb" as far as how much land you can mow in an hour with a certain width mower?
I do have a large fence line and like the offset feature of a flail mower that would allow me to get up close to a fence.
Does anyone have a "rule of thumb" as far as how much land you can mow in an hour with a certain width mower?
JJJackson
New member
I think I read on one of the other sites that the recommended max speed is 5 mph. This might help in determining the amount per hour of cut. If I am wrong about the speed someone please correct me. Joe
