J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,973
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
Is this true with other brands of connect under pressure?
flat faced quick disconnects issues
- Thread starter Rio_Grande
- Start date
- Views: 7100
Discount Hydraulic Hose
Silver Member, Advertiser
As far I know, yes. But I'm not an expert on all brands.
This is my understanding, let me know if I seem to have something wrong.
If you have pressure on one side, and the coupler on the pressurized side allows you to connect under pressure, that pressure is safely transferred into the mating coupler when you connect the two halves together. If you have pressure on both sides, there is no way to release it, and the couplers cannot be connected.
This is my understanding, let me know if I seem to have something wrong.
If you have pressure on one side, and the coupler on the pressurized side allows you to connect under pressure, that pressure is safely transferred into the mating coupler when you connect the two halves together. If you have pressure on both sides, there is no way to release it, and the couplers cannot be connected.
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,973
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
The Parker 8200/9200 Series QD can be connected, with both sides under pressure.
Some of the others will connect up to 500 psi .
Some of the others will connect up to 500 psi .
Last edited:
Discount Hydraulic Hose
Silver Member, Advertiser
My bad. I thought you were only asking about flat-face couplers.
There are some other couplers that connect under pressure. Wet Line Couplers (wing-nut style) and 10,000 psi Screw Together Couplers (Enerpac C604 Interchange) will also connect under pressure, and I think they can all be connected with pressure on both sides.
