Floor mat for L2501?

[number two]

Has anyone added a floor mat of some kind on an L2501?
I'd like to put something over the metal flooring,and I'm not sure how much I would like the bedliner treatment.

Thanks in advance for your comments!

 

[old and tired]

Over on Orange tractor talks...

Laser cut L2501 floor mats

I also purchased a set. If I didn’t know any better, I would call them OEM. Very satisfied Hawk

www.orangetractortalks.com

 

[number two]

Awesome!
Anyone have his e-mail or contact info?
I'm not on OTT.
Should I be?

Thank you again!

 

[Rdrcr]

^^^^
Agreed!

Those look pretty nice! Hadn’t seen them before. I wasn’t planning on floor mats but, these appear promising. Price and contact info would be great.

Mike

 

[mcfarmall]

Awesome!
Anyone have his e-mail or contact info?
I'm not on OTT.
Should I be?

Thank you again!

If you want to be a member of the cool crowd then you should be on OTT! You can still be on TBN too, I am.

 

[old and tired]

I'm not on OTT.
Should I be?

Depends on if you like talking about orange tractors (and mainly only orange!) - there are posts that are in both locations but there are a couple of mechanics that work for Kubota dealers - information that you just don't get here.

They are a nice bunch... you will get banned or censored if you are not nice so if that's an issue with you... tell them mcfarmall sent you!!!

 

[number two]

^^^^
Agreed!

Those look pretty nice! Hadn’t seen them before. I wasn’t planning on floor mats but, these appear promising. Price and contact info would be great.

Mike

Text Ken @ 864-633-9664 for the floormats.

 

[number two]

If you want to be a member of the cool crowd then you should be on OTT! You can still be on TBN too, I am.

Depends on if you like talking about orange tractors (and mainly only orange!) - there are posts that are in both locations but there are a couple of mechanics that work for Kubota dealers - information that you just don't get here.

They are a nice bunch... you will get banned or censored if you are not nice so if that's an issue with you... tell them mcfarmall sent you!!!

Thanks guys! I think I'm signed up there.
Where should I make the first post?

 

[varmint]

I cleaned my painted steel floor boards, wiped them with acetone, and painted them with truck bed liner about 5-6 years ago. It has held up perfectly, and I am happy with the results. I found a photo showing what I did. It wasn't difficult to do, and well worth the effort, I thought.
I masked off the center cover and sprayed the three strips on it, since I often step on it...

 

[Rdrcr]

^^^^
Looks good!

Mike

 

[number two]

That does look quite good,Varmint.
I did order the floormats,but may use your idea for the center cover.
Again,thanks for all the replies!

 

[5030]

If you want to be a member of the cool crowd then you should be on OTT! You can still be on TBN too, I am.

That is a personal opinion.... of yours, not mine.

 

[PILOON]

Wanting floor matts for my CUT mainly to retain heat I used those interlocking 1/2" foam matts they sell in many dollar stores.
I simply custom trimmed to fit and voila, insulated floor matts.
Main problem was the matts sold were all different collared but what the hey, warm feet is what it was all about.

 

[5030]

Replaced the floor mat on my M9 open station last year. Bought the OEM mat and it was just under 100 bucks, so a cheaper alternative is nice. My issue was it's form fitted (over the center hump) and the OEM mat comes with push pins and has the gear shift selector molded in plus, it's very thick. My cab M9 has insulation under the floor mat from the factory. Never wore it out (mat or insulation layer).