FOR ALL U GUYS THAT WANT TO KNOW KNOTS & RIGGING

   / FOR ALL U GUYS THAT WANT TO KNOW KNOTS & RIGGING
  • Thread Starter
#11  
This next pic is 4 all of u that doubt my expertise..."nomad" in particular and the ones that want to be the judges and juries in one statement on a string!!!!
This is a pic that was taken today when i went down to my buddy Norm's to fix my "better halfs exhaust " and he was in the middle of the second phase of tigging 6.... 12-14' old oil tanks with the end's cut off into a 90' drainage pipe for his new circle track!!!! and a few pics too boot! the rigging ...carrying and his "BEYOND THE THUNDERDOME PORTABLE ALL WHEEL 6 WHEEL DRIVE CRANE WITH 4 TON FRONT COUNTERWEIGHT CRANE CARRYING LOAD AND ALL!!
/forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif

THIS IS US WELDING AND FABRICATING JIST IN CASE U THINK I AND MY FRIEND DON'T KNOW WHAT WE R TOKKIN BOUT!!!!
 

Attachments

  • 439648-114_1473_1.JPG
    439648-114_1473_1.JPG
    94.4 KB · Views: 134
   / FOR ALL U GUYS THAT WANT TO KNOW KNOTS & RIGGING
  • Thread Starter
#12  
this is my buddy norm pushing 3 of 6 pieces togither into the shop to b welded with his "crane /beast"..at me to fit and weld!!!
 

Attachments

  • 439652-114_1476_1.JPG
    439652-114_1476_1.JPG
    69.2 KB · Views: 119
   / FOR ALL U GUYS THAT WANT TO KNOW KNOTS & RIGGING
  • Thread Starter
#13  
YES WE STOP A LOT OF TRAFFIC UP HER IN MAINE!!....this is the fabricated jist today "culvert..from #### coming out of the shop to the race track to b /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif!!!
 

Attachments

  • 439655-114_1477_1.JPG
    439655-114_1477_1.JPG
    64.5 KB · Views: 117
   / FOR ALL U GUYS THAT WANT TO KNOW KNOTS & RIGGING
  • Thread Starter
#14  
Norm drivin the hell's angel's rig with half of the culvert attached up the road to the race track..right beside his mud run pit!!!! /forums/images/graemlins/blush.gif /forums/images/graemlins/blush.gif /forums/images/graemlins/blush.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif
 

Attachments

  • 439658-114_1478_1.JPG
    439658-114_1478_1.JPG
    65.4 KB · Views: 115
   / FOR ALL U GUYS THAT WANT TO KNOW KNOTS & RIGGING #15  
I think the figure -8 is a great knot. Of note, it is pretty universal throughout fire fighter training. You can go to any fire dept, at 3pm in the sun or 3am in the sleet, and be able to work together with common knot knowledge. Most Dept's use the ISTFA books, which have a decent ropes chapter.

The sqaure knot is over rated I think. It can come undone, or jam, too easily. The Becket bend is nicer. For two ropes, there is always the figure-8 follow through(same size).

About those web pages... I sure would like to know how they did that animation /forums/images/graemlins/shocked.gif

One other thing, for learning knots. For our Cub Scout Den, I took lengths of cord, and dyed 1/2 of it orange. It is easier to learn the knots when you can see the working end and running end very clearly.
 
   / FOR ALL U GUYS THAT WANT TO KNOW KNOTS & RIGGING
  • Thread Starter
#16  
Yesterday's work and today's work put in place and awaiting their final destiny!!!...underground 4 the lower curve of the oval track......!!! /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif


By the way.........anyone that wants to come to maine.....
and is willing to camp out is free and willing to!!!!! Big bonfires and free camping to all that loveto have a good time !!!!!!

/forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gifTodd the maniac and lineman/rigger from maine and u will have free passes on me!!!! /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif
 

Attachments

  • 439666-114_1484_1.JPG
    439666-114_1484_1.JPG
    86.3 KB · Views: 125
   / FOR ALL U GUYS THAT WANT TO KNOW KNOTS & RIGGING
  • Thread Starter
#17  
The viewing area and concession stands 4 the deep mudrun pit!!!! Anyone wanna run their cut????? /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif
He's gonna have a run/pull against each other this year!!! /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gifand jist so u don't think that this is rinkeydink!!!!!!!!! His clay get's so deep and thick that last year 5 out of 40 trucks blew parts and tranny's jist runnin uphill /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif..and the last pic is the 175,000gal.
water tank that takes him 1 week to fill witha pump is in yer sights!!thats what he gravity feeds to turn 6' of clay run into a swamp from he** /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif

back left in the way back /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif
 

Attachments

  • 439669-114_1485_1.JPG
    439669-114_1485_1.JPG
    78.7 KB · Views: 129
   / FOR ALL U GUYS THAT WANT TO KNOW KNOTS & RIGGING
  • Thread Starter
#18  
And here's the look up the mudrun with the 175,000 gal gravity feed water tank!!!...I have seen even the baddest of bad 4x4 trucks jist wallow in the crud /grit and grime and even after the 2nd day it get's even worse and not even b able to make it out!!!
/forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gifa lotta fun!!! /forums/images/graemlins/grin.gif
 

Attachments

  • 439679-114_1482_1.JPG
    439679-114_1482_1.JPG
    88.5 KB · Views: 111
   / FOR ALL U GUYS THAT WANT TO KNOW KNOTS & RIGGING
  • Thread Starter
#19  
looks like i forgot these last night so here's another use for the quick release reverse half hitch
 

Attachments

  • 439875-114_1470_1.JPG
    439875-114_1470_1.JPG
    72.9 KB · Views: 100
   / FOR ALL U GUYS THAT WANT TO KNOW KNOTS & RIGGING
  • Thread Starter
#20  
and now i can safely drive to norm's to weld it this time ...universal muffler... /forums/images/graemlins/mad.gif /forums/images/graemlins/mad.gif..just clamping this thing is not going to work..but at least it's well out of danger
/forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif
 

Attachments

  • 439881-114_1470_1.JPG
    439881-114_1470_1.JPG
    72.9 KB · Views: 99

Tractor & Equipment Auctions

INDUSTRIAL SAND BLASTER (A50854)
INDUSTRIAL SAND...
2007 Mitsubishi Fuso FE84D 16ft Dovetail Flatbed Truck (A50323)
2007 Mitsubishi...
Trailer Axles (A50860)
Trailer Axles (A50860)
2019 POLARIS RANGER 4x4 UTV (A51222)
2019 POLARIS...
2025 K0720 UNUSED Metal Farm Driveway Gate Set (A50860)
2025 K0720 UNUSED...
2004 Dodge Dakota Ext. Cab Pickup Truck (A50323)
2004 Dodge Dakota...
 
Top