MapleLeafFarmer
Platinum Member
- Joined
- Jun 20, 2011
- Messages
- 545
- Location
- Canada
- Tractor
- lots including Kubota B's, L's, cat, etc.. over many years
Wallenstein BXM-32 PTO driven chipper / shredder / mulcher for tractors up to 35hp or slightly bigger.
I know its wrong time of year but will give it a try otherwise I will list back up in the spring.
ス price so $2,000. New price lands it in about $4,000
Like new, always stored inside and maybe 2 hours of running time on it. Only time it has been wet is when I washed it before waxing it.
thanks for looking
Bill
Wallenstein BXM32 3-Inch 540 RPM PTO Chipper Shredder
https://www.youtube.com/watch?v=vB41Q29Exa0 VIDEO IN ACTION
Directly Connect To Your Tractor's PTO
•Power is transfer directly into a chipping/shredding action
•Quickly turns 3-inch limbs and other debris into mulch
•12-35HP required for operation
•25-35HP required to reach maximum capacity
Heavy Duty Rotor
•17.5" chipper rotor with 2 offset knives
•Large diameter rotor for faster tip speeds and improved chipping
Tool Hardened Steel Blades
•Chipper blades reversible for consistent cut
Exclusive Chop Block Shredder Technology
•Uses an anvil action with 27 knives to finely process material
•Material is trapped, forcing it to be cut more consistently
Extra Large Shredder Housing
•10" X 10" shredder housing accept debris up to 1" in diameter
Convenient 360 Degree Chute Rotation
•Chipper and shredder use same chute exit
•Provides accurate chip & mulch placement where needed
I know its wrong time of year but will give it a try otherwise I will list back up in the spring.
ス price so $2,000. New price lands it in about $4,000
Like new, always stored inside and maybe 2 hours of running time on it. Only time it has been wet is when I washed it before waxing it.
thanks for looking
Bill
Wallenstein BXM32 3-Inch 540 RPM PTO Chipper Shredder
https://www.youtube.com/watch?v=vB41Q29Exa0 VIDEO IN ACTION
Directly Connect To Your Tractor's PTO
•Power is transfer directly into a chipping/shredding action
•Quickly turns 3-inch limbs and other debris into mulch
•12-35HP required for operation
•25-35HP required to reach maximum capacity
Heavy Duty Rotor
•17.5" chipper rotor with 2 offset knives
•Large diameter rotor for faster tip speeds and improved chipping
Tool Hardened Steel Blades
•Chipper blades reversible for consistent cut
Exclusive Chop Block Shredder Technology
•Uses an anvil action with 27 knives to finely process material
•Material is trapped, forcing it to be cut more consistently
Extra Large Shredder Housing
•10" X 10" shredder housing accept debris up to 1" in diameter
Convenient 360 Degree Chute Rotation
•Chipper and shredder use same chute exit
•Provides accurate chip & mulch placement where needed
Attachments
Last edited: