ive got a 2810 and im ready to pull my hair out trying to get fuel to the 3rd and last injector . 1&2 both bled out fairly easy AND IVE BEEN AT THE 3RD ON AND OFF FOR THREE DAYS. Anyone care to give advice , i could sure use it . Ive run diesels and heavy equipment for 40 yrs . this lil tractor has me whooped.
Jerry/MT
Elite Member
- Joined
- Feb 2, 2008
- Messages
- 3,141
- Location
- North Idaho-The Palouse
- Tractor
- New Holland TD95D, Ford 4610 & Kubota M4500
Why are you having to bleed it? Did you run it out of fuel? Or did it just stop on you? You need to tell us more than just the model and that you can't get fuel to the #3 injector. Have you checked for blockage in the fuel delivery?
thepumpguysc
Elite Member
Is it squirting from the pump.??
The cam ring inside the pump may have a couple of smashed lobes.??
Do u know about the filter under the pumps inlet nut.??
If not, google is your friend.
The filter may b clogged.??
Good luck
The cam ring inside the pump may have a couple of smashed lobes.??
Do u know about the filter under the pumps inlet nut.??
If not, google is your friend.
The filter may b clogged.??
Good luck
