Aug 25, 2022 / Ford 3000 lift stuck after first time use after sitting 3 years stuck in up position . Any ideas the problem. Thanks #1 T tsullins New member Joined Aug 25, 2022 Messages 1 Tractor Ford 3000 Lift stuck in up position on 3000 Ford , be sitting awhile after cranking lift raised now won’t go down
Lift stuck in up position on 3000 Ford , be sitting awhile after cranking lift raised now won’t go down
Aug 25, 2022 / Ford 3000 lift stuck after first time use after sitting 3 years stuck in up position . Any ideas the problem. Thanks #2 C CalG Super Member Joined Sep 29, 2011 Messages 5,833 Location vermont Tractor Hurlimann 435, Fordson E27n, Bolens HT-23, Kubota B7200, Kubota B2601 Rust! The cylinder needs to come apart. It's likely the transmission/rear end top plate that needs removed. A ball hone is likely all it needs. Those cylinder packing tolerate abuse!
Rust! The cylinder needs to come apart. It's likely the transmission/rear end top plate that needs removed. A ball hone is likely all it needs. Those cylinder packing tolerate abuse!
Aug 26, 2022 / Ford 3000 lift stuck after first time use after sitting 3 years stuck in up position . Any ideas the problem. Thanks #3 O oldnslo Super Member Joined Jan 20, 2010 Messages 8,127 Location Northern, IL Tractor Branson 2400H, JD X540 Does the 3000 have a drop rate control? This is usually a knob located under the front of the seat. Do you have any load on the arms?
Does the 3000 have a drop rate control? This is usually a knob located under the front of the seat. Do you have any load on the arms?
