Yes, it is fully in. When I took off lift cover it seemed in working order. I also have a selector which sits under my seat on top of the adaptor plate. It has three positions, I use the middle position. I'm taking out pump again tonight to check filter is not blocking ( don't no why it should be!).
Ford 5000 losing hydraulic pressure when it heats up
oldnslo
Super Member
pomnut,
If I remember correctly the pump pressure line is fed up through the right side of the transmission housing directly into the hydraulic control valves. Does this area also get hot? If yes then keep working your way down stream to find the source of the heat. Al we had on our 5000 was a single directional valve and the 3 point hitch. Sounds like you have more options on yours.
If I remember correctly the pump pressure line is fed up through the right side of the transmission housing directly into the hydraulic control valves. Does this area also get hot? If yes then keep working your way down stream to find the source of the heat. Al we had on our 5000 was a single directional valve and the 3 point hitch. Sounds like you have more options on yours.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
center section maybee.. not tranny housing...
