Forks forks

[Sniggle]

I strapped on my Ebay special chain on forks today. They worked great to pick up and carry my 60 inch MMM from where I dropped it (driveway) to the pallets I am temporarily storing it on as I prep for lots of ground work.

I was pleased with myself

-------------------------------------------------
2003 Kubota B7800 (new to me), FEL, Woods RB72, GB60, LR72, PHD, Chain on forks, Pats Easy chain still to be installed.

1980's KUbota G1900

 

[CurlyDave]

I kicked around the clamp on forks and also the idea of building my own but ended up buying the real thing. These are MDS 5,200 pound forks and my dealer sold them to me for $700. They are actually OVERKILL for my little tractor but I like em'

I agree with you. I got a used set of JD forks for $600 and with the QA system on my tractor, they are easy to use. And, I do not have to worry about bending the bucket or overloading the forks.

I also bought a clamp-on trailer hitch receiver from Paynes', which works on the same clamping mechanism as the clamp-on forks, and I have been a little disappointed with it. The problem is that it will easily move from side-to-side, pivoting around the clamping point under the screw if I apply any side force to it. Inevitably repositioning a trailer in my yard produces enough side force to get 2' or 3" of side movement in the ball.

I suspect the forks would have the same problem. 90% of the time this would not be an issue, but the times it is an issue, I can foresee a real safety problem. For instance, if you were to carry a pallet over a surface which had a side-to-side slope of more than a few%, you might encounter a sudden sideways shift of the load to the downhill side, which would really destabilize a small tractor.

 

[wedge40]

This has info about member JMC who went to the local salvage yard and picked some used forks then had Markham welding ship him a frame with QA bracket.
http://www.tractorbynet.com/forums/build-yourself/112990-homemade-pallet-forks.html?highlight=pallet

He ended up with under $400 in a set of pallet forks. I have few projects going right now and would need to convert my FEL to QA setup first. I think even doing it that way it would cost me almost a grand, because of the QA switch. But once moved to QA the skies the limit.

Wedge

 

[Erik_in_Hoyt]

Chris,
$500 for a new set of light duty forks is a pretty decent price.
I paid $450 for my used set of "heavy" forks with headache rack and found out later that it weas a steal -- used forks from the rental yards around here were around 6 2 years ago and new ones $750-1000.

good luck with the new tractor when it shows!

 

[Mighty Dodge]

If you have farm or used equipment auctions in your area you can get a set fairly cheap and adapt them.

 

[jarbill]

Hey, Beavis:

Yeah. I like the look of that better. I decided to go with my dealer's forks. His were more expensive than yours, and they're rated at more than my tractor can lift, and they're 48" forks, but they have a high grill on the back on them, and I like the idea of that making it a little harder to dump something back in my lap than with the clamp-on forks, and the clamp-on forks weren't all that much cheaper by the time you added shipping to the price.

I also know with rising metals prices that almost anything metallic is getting really expensive

Jerry in Texas

 

[jdbower]

Another benefit of the full forks instead of the clamp-ons is that there are a lot more tiedown points and a flat backstop for actual pallet work. For brush removal this may not be a big deal, but I'm sure you'll find that there are a lot of uses for pallet forks once you get them. No regrets from my Frontier forks, even if I can't claim a fantastic deal like some others in this thread got