Foton FT254 Where is the proper place to connect my cab heater core?

[jacques54]

¾ X 2½ inside as sceletin

In French we call it "forence" that what I use as a frame (the word I should use).

Here a link of a You tube video I did last year. The video was for a noise I heard and this fall I fix that, I hope.
https://www.youtube.com/watch?v=oPefOpEccdI
In the video you can see the Inside of the cab and near my left knee where the heater is. When I built the back window, the top of frame was too low and I had to bend myself to see far enough for aligment when backing up, while snow-blowing. It is modified now, the top of window is highter.

Last thursday we received around 6in. of snow and it almost melt now. weather chanel say that we should expect snow for two days then on Christmas eve they expect rain and 6°c. Normal for here in Quebec should be around -8°c , El Nino I gess.

Jacques

 

[D0TC0M]

Just remove the bolt looking plug and connect the return hose. The radiator drain cock is really not a good place for the return heater hose.

Well I have lots of heat now and the engine temps are right around 75c perfect. Thanks jacques

 

[jacques54]

You are welcome,

On my side the noise I was hearing last year is gone, at least for now. This fall I had replaced the pilot bearing and the TOB too. I had'nt use my snowblower long enought but keeping my fingers cross.

Jacques