Found an old Modern boxblade

   / Found an old Modern boxblade #22  
ok, reality check could be in order here

Just giving you a bad time. :D

I would personally just hit it with the wire wheel and flapper to knock down the rough stuff, and spray it. You know...a 20 foot paint job. Then I'd put it to work.
 
   / Found an old Modern boxblade #23  
I am working on getting my little scraper blade ready for paint. I am using paint stripper to remove the old paint. Then I am going to use a wire wheel to clean up it us some more. I have a area that I may have to sandblast. I have a Spot Blaster I will probably use for that.
 
   / Found an old Modern boxblade #24  
I bought this old Gannon. I ain't gonna paint it. I've got work to do with it and I figure it's just a tool. I don't paint my hammer or crowbar either.

photo-7-L.jpg
 
   / Found an old Modern boxblade #25  
Congratulations on that big boy!

Try EBay for scarifiers too, I've seem many of them on there.

Thomas

Thanks for the link, I do plan on getting some rippers. I estimate the weight around 1100 -1200lbs. Good thing about the box blades, they are basically the same used as they are new, can't really were them out, I'm happy about the find.
 
 

Tractor & Equipment Auctions

PENDING SELLER CONFIRMATIONS (A45679)
PENDING SELLER...
2015 Dodge Durango SUV (A46684)
2015 Dodge Durango...
John Deere TX 4x2 Gator (A47307)
John Deere TX 4x2...
2016 Ford Transit 250 Cargo Van (A46683)
2016 Ford Transit...
2007 K-K Systems S/A Solar Towable Message Board (A46683)
2007 K-K Systems...
NorAm Grader (A46683)
NorAm Grader (A46683)
 
Top