Fred Cain nine Shank cultivator

[jsturock@hotmail.com]

Where can I get replacement reversible tips and bolts for a Fred cain spring loaded field cultivator I need nine of them with the nuts and bolts. Thanks

 

[workinonit]

I buy mine at Ag Supply.

 

[jeff9366]

eBay

Pardon Our Interruption...

Correct plow bolts size: 7/16"-14 X 1-3/4"

(#3 plow bolts - 1/3/4" length)

Pardon Our Interruption...

 

[jeff9366]

Where can I get replacement reversible tips and bolts for a Fred cain spring loaded field cultivator I need nine of them with the nuts and bolts. Thanks

As SHIPPING will be a significant part of your total cost, it would be helpful to know your LOCATION.

 

[jsturock@hotmail.com]

As SHIPPING will be a significant part of your total cost, it would be helpful to know your LOCATION.

Northeast pa

 

[jsturock@hotmail.com]

I buy mine at Ag Supply.

Yep I looked there but I don’t know what the size is because I can’t find a schematic that tells me what’s on there

 

[workinonit]

I usually just take one and match them up.

 

[jeff9366]

I looked there but I don’t know what the size is.

While it has been five years since I last purchased point replacements I am confident the SKU IF210UB will be an exact replacement. SKU IF210UB was impressed into my OEM points.

More Venders:

cultivator point if210 for sale



Contemporary Fred Cain, Bush Hog and Dirt Dog Field Cultivators are identical except for paint and decals.

 

[jsturock@hotmail.com]

I usually just take one and match them up.

No one in my area sells them that I know of.

 

[workinonit]

I take it you don't have a local Ag Supply?

 

[jyoutz]

If nothing else, just contact the manufacturer.

 

[jsturock@hotmail.com]

I take it you don't have a local Ag Supply?

Apparently not if I’m on here

 

[jsturock@hotmail.com]

If nothing else, just contact the manufacturer.

I tried that already tell me how you contact the manufacturer I wouldn’t be here if it was that easy

 

[workinonit]

Apparently you have an old shank, I'm assuming. Take that shank and measure the width, the hole or slot size and since it's probably worn out extrapolate the length. Then go search what I did and order something that matches or is close. There really aren't that many different sizes. This truly isn't that difficult.

 

[jyoutz]

I tried that already tell me how you contact the manufacturer I wouldn’t be here if it was that easy

This isn’t the manufacturer, but this is who I bought mine from. I suggest a call and ask them your questions.

Fred Cain 9 Shank 3 Point Field Cultivator

This Field Cultivator is a good attachment to break new ground or to tear up the hard pan in the field. Free Shipping

www.everythingattachments.com