Front end loader cylinders not acting right

[Jrasband]

maybe this is my problem, three of the four color coded covers slipped off while I had the loader off. I thought I had it hooked right cause nothing seemed backwards. I will report back in a bit.

 

[Tinhack]

Check your fluid level.

 

[LD1]

maybe this is my problem, three of the four color coded covers slipped off while I had the loader off. I thought I had it hooked right cause nothing seemed backwards. I will report back in a bit.

I guessing this is the issue. Just need to confirm

 

[Jrasband]

yep, swapped the hoses around and everything works normal again!

 

[jonsstihl]

thats a nice cheap solution. Glad to hear everything worked out.

 

[LD1]

Get some more color coded caps, or tape, or spray paint, or something to mark them so it wont happen again

 

[ruffdog]

Outback wrap hose markers:

https://www.amazon.com/Outback-Wrap...80209969&sprefix=outback+wrap+,aps,222&sr=8-3

https://www.amazon.com/Outback-Wrap...80210050&sprefix=outback+wrap+,aps,222&sr=8-4