front end loader

   / front end loader #1  

DisgustingGus

New member
Joined
Nov 20, 2005
Messages
2
Location
southeast wisconsin/U.S.A.
Tractor
ac-620
I was wondering If anyone could give me some advice. I'm in the first stages of building a loader for a gardentractor I have(ac 620). I was looking on this site and saw some very good designs. I have a good idea of what I want for a finished product. I would like to use rectangular tubing for the arms and frame.Was wondering if 2x3 with a 3/16 wall would work? too big too small too thick too thin any answers or suggestions would be a great help. Thanks /forums/images/graemlins/confused.gif
 
   / front end loader #2  
2x3 with 1/8 walls would be fine, 3/16 even better.

Not sure how your AC compares but I am using 2x2x1/8 box for my loader on a 12HP wheelhorse

I think someone made a loader using the exact smae metal dims as you plan to at Machine builders Lots of info there.

People generally use 3x3 box for the uprights for added hyd fluid capacity if you are planning to use the uproghts as the fluid tank

Good luck and be sure to post pics of progress

Hope this helps
 
   / front end loader
  • Thread Starter
#3  
Mith, thanks alot for the info. the tractor has a 20 horse engine and weighs about 1400 lbs.I sure hope to finnish this before the end of winter.(seems all my boys forgot how to run a snowblower or shovel) again thank you, Mith
 

Tractor & Equipment Auctions

2018 Ram 5500 Bucket Truck 4x4 with Versalift VST40 - 45FT Rotating Bucket and Jib Winch (A51039)
2018 Ram 5500...
2020 CATERPILLAR 326 EXCAVATOR (A51242)
2020 CATERPILLAR...
2007 INTERNATIONAL SF625 BUCKET TRUCK (A50854)
2007 INTERNATIONAL...
2015 KUBOTA 1140CPX RTV (A51406)
2015 KUBOTA...
Ranch Hand Pickup Truck Grill Guard (A49461)
Ranch Hand Pickup...
2019 John Deere 8295R MFWD Tractor (A50657)
2019 John Deere...
 
Top