front loader hook-up

   / front loader hook-up #1  

hrvata

New member
Joined
May 19, 2004
Messages
5
Location
PA
Tractor
Magnatrac 4800
I have a Ford Model 1210 tractor and the hydraulic manifold has inlet and outlet ports to connect the spool valve to operate the loader. I connected the outlet of the manifold to the inlet of the valve and the outlet of the valve to the inlet of the manifold. The up valve raises the loader, the down valve continues to raise the loader. Am I connected right?
 
   / front loader hook-up #2  
I have a Ford Model 1210 tractor and the hydraulic manifold has inlet and outlet ports to connect the spool valve to operate the loader. I connected the outlet of the manifold to the inlet of the valve and the outlet of the valve to the inlet of the manifold. The up valve raises the loader, the down valve continues to raise the loader. Am I connected right?

I am having the very same issue. Did you ever find a solution? I have a Ford 1210 model and I am trying to plumb a Koyker 110 front end loader. I have tried swaping inlet and oulet hoses I have turned the screw on the operating manifold to both positions, and nothing worked. It still raises but will not lower..
 
   / front loader hook-up #3  
are the lines to the loader itself hooded up right? If the loader valve includes regeneration, and the hoses are hooked up wrong I could see it causing this issue. Do the bucket curl functions operate correctly?
 

Tractor & Equipment Auctions

2019 Chevrolet Tahoe SUV (A48082)
2019 Chevrolet...
2015 FORD F-250 XL SUPER DUTY TRUCK (A51406)
2015 FORD F-250 XL...
2005 Ford Escape XLT SUV (A48082)
2005 Ford Escape...
2013 Hyundai Veloster Hatchback (A48082)
2013 Hyundai...
2006 Mack CV713 Granite Tri-Axle Roll-Off Truck (A48081)
2006 Mack CV713...
2025 K2223 UNUSED Double Garage Metal Shed (A50860)
2025 K2223 UNUSED...
 
Top