Oil & Fuel Fuel leak on Jinma 254

[Rich Waugh]

You can get any parts you need from Tommy at Affordable Tractor Sales in Texas. He's a great guy to do business with and devotes a lot of time to answering questions on the forums.

 

[Part timer]

Assuming you're only replacing one hard line, the engine should start on the other cylinders. It will run rough briefly as fuel pushes air out of your new line. If you want to accelerate the process, don't tighten the top hex collar all the way down at first. That will permit the air in the new line to escape faster. As soon as you see the bubbles turn into raw fuel, THEN finish tightening the top hex collar.

As far as the replacement line, check here. Each line is has a different part number, so you'll have to be specific when you order a replacement.

//greg//

Alright thanks!!!

Chris

 

[Affordable]

Thanks for the refferral Rich,if we can help you Cris let me know

Tommy
Affordable Tractor Sales
"Your Jinma Parts Superstore"
Home of compact Jinma, Foton, and Koyker Tractors and Parts, Wood Chippers, Backhoes - Affordable Tractor Sales Company

 

[Willl]

Before you remove it, have you tried snugging it up a bit ?

 

[Part timer]

Before you remove it, have you tried snugging it up a bit ?

Yes I did but they are all very tight!!

 

[Part timer]

Thanks for the refferral Rich,if we can help you Cris let me know

Tommy
Affordable Tractor Sales
"Your Jinma Parts Superstore"
Home of compact Jinma, Foton, and Koyker Tractors and Parts, Wood Chippers, Backhoes - Affordable Tractor Sales Company

Tommy I will get in touch with you when I figure out exactly what I need!

Thanks
Chris